Synology cannot connect to AD410
Posted: Sun Feb 12, 2023 3:28 am
Dear Forum members,
I have a weird issue that I've been struggling with...I would really appreciate your thoughts.
It's obvious, the network config is not the strength of this AD410 (not having proper UI to set manually, etc.), but it is still manageable from router side. What I cannot manage is the following issue.
Now I have an AD410, which cannot be pinged ONLY from my Synology:
ash-4.4# ping 192.168.1.105
PING 192.168.1.105 (192.168.1.105) 56(84) bytes of data.
From 192.168.1.108 icmp_seq=1 Destination Host Unreachable
From 192.168.1.108 icmp_seq=2 Destination Host Unreachable
From 192.168.1.108 icmp_seq=3 Destination Host Unreachable
From 192.168.1.108 icmp_seq=4 Destination Host Unreachable
^C
--- 192.168.1.105 ping statistics ---
6 packets transmitted, 0 received, +4 errors, 100% packet loss, time 1004ms
I can ping from everywhere else (even from a VM running in Synology):
peter@ubuntu:~$ ping doorbell
PING doorbell.lan (192.168.1.105) 56(84) bytes of data.
64 bytes from Doorbell.lan (192.168.1.105): icmp_seq=1 ttl=64 time=221 ms
64 bytes from Doorbell.lan (192.168.1.105): icmp_seq=2 ttl=64 time=2.07 ms
64 bytes from Doorbell.lan (192.168.1.105): icmp_seq=3 ttl=64 time=2.43 ms
^C
--- doorbell.lan ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
But, Synology can ping everything else, except this AD410.
What am I doing wrong?
I've reset many-many times, changed, IP many-many times, another WiFi SSID, etc., but the same result...
I've found a similar issue, logged here: https://community.synology.com/enu/forum/3/post/148039
Thank you,
Peter
I have a weird issue that I've been struggling with...I would really appreciate your thoughts.
It's obvious, the network config is not the strength of this AD410 (not having proper UI to set manually, etc.), but it is still manageable from router side. What I cannot manage is the following issue.
Now I have an AD410, which cannot be pinged ONLY from my Synology:
ash-4.4# ping 192.168.1.105
PING 192.168.1.105 (192.168.1.105) 56(84) bytes of data.
From 192.168.1.108 icmp_seq=1 Destination Host Unreachable
From 192.168.1.108 icmp_seq=2 Destination Host Unreachable
From 192.168.1.108 icmp_seq=3 Destination Host Unreachable
From 192.168.1.108 icmp_seq=4 Destination Host Unreachable
^C
--- 192.168.1.105 ping statistics ---
6 packets transmitted, 0 received, +4 errors, 100% packet loss, time 1004ms
I can ping from everywhere else (even from a VM running in Synology):
peter@ubuntu:~$ ping doorbell
PING doorbell.lan (192.168.1.105) 56(84) bytes of data.
64 bytes from Doorbell.lan (192.168.1.105): icmp_seq=1 ttl=64 time=221 ms
64 bytes from Doorbell.lan (192.168.1.105): icmp_seq=2 ttl=64 time=2.07 ms
64 bytes from Doorbell.lan (192.168.1.105): icmp_seq=3 ttl=64 time=2.43 ms
^C
--- doorbell.lan ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
But, Synology can ping everything else, except this AD410.
What am I doing wrong?
I've reset many-many times, changed, IP many-many times, another WiFi SSID, etc., but the same result...
I've found a similar issue, logged here: https://community.synology.com/enu/forum/3/post/148039
Thank you,
Peter