Page 5 of 8
Re: New Firmware for AD110 and AD410 Available
Posted: Sat Feb 11, 2023 8:41 am
by GaryOkie
Hi
@fennec62 - I assume you installed the update from the link in this OP, but didn't read any of the followup posts, such as:
For anyone thinking about installing the latest AD410 firmware from the OP link - DO NOT - if you want event handling to work with Home Assistant, Hubitat, et.al.
You are going to have to contact
@eliamcrest with an Amcrest Support case to request the original firmware (v.20210220).
I've pleaded with Eli weeks ago to add release notes to this firmware to warn users this is a breaking change/BUG to event handling - OR - to immediately pull this firmware until fixed. No response. The faulty firmware is still listed for download with no caution.
Re: New Firmware for AD110 and AD410 Available
Posted: Sat Feb 11, 2023 8:52 am
by GaryOkie
kantlivelong wrote: ↑Thu Jan 26, 2023 11:46 am
@GaryOkie, I have a ticket open that Eli is tracking for this. His last update is that devs would be back in next week to look into the eventManager issue.
Hi
@kantlivelong - Do you have any update from Eli? I'm wondering if the developer's have yet acknowledged this event handling bug and are working on fixing it or not.
Thanks!
Re: New Firmware for AD110 and AD410 Available
Posted: Sat Feb 11, 2023 9:08 am
by fennec62
GaryOkie wrote: ↑Sat Feb 11, 2023 8:41 am
Hi @fennec62 - I assume you installed the update from the link in this OP, but didn't read any of the followup posts, such as:
For anyone thinking about installing the latest AD410 firmware from the OP link - DO NOT - if you want event handling to work with Home Assistant, Hubitat, et.al.
You are going to have to contact @eliamcrest with an Amcrest Support case to request the original firmware (v.20210220).
I've pleaded with Eli weeks ago to add release notes to this firmware to warn users this is a breaking change/BUG to event handling - OR - to immediately pull this firmware until fixed. No response. The faulty firmware is still listed for download with no caution.
Yes I don't see forum before update
I contact @eliamcrest for have firmware downgrade
thanks for your help
Re: New Firmware for AD110 and AD410 Available
Posted: Sat Feb 11, 2023 9:11 am
by fennec62
Ok I send email from AMCREST support
Re: New Firmware for AD110 and AD410 Available
Posted: Mon Feb 13, 2023 8:20 am
by fennec62
No news
So if you want know when someone push button just active Amcrest Chime mechanic and make this assembly after each push contact blue change and you can surv with raspberry or other with gpio input mode and python script
Re: New Firmware for AD110 and AD410 Available
Posted: Mon Feb 13, 2023 11:00 am
by GaryOkie
Your email/support request was sent 2 days ago on a Saturday. Amcrest support doesn't work weekends.
That is an interesting approach you've come up with to monitor button push. But since you've mentioned using a Raspberry, you should look into Home Assistant or amcrest2mqtt. Button press and motion/human detection API events can trigger any automation/alerts you want - no clever electrical gizmo's required.
Re: New Firmware for AD110 and AD410 Available
Posted: Mon Feb 13, 2023 11:59 am
by fennec62
Yes with firmware can do that and last firmware can't .... So I make this assembly and he works very nice it's like chime but with little adaptation
Re: New Firmware for AD110 and AD410 Available
Posted: Mon Feb 13, 2023 1:25 pm
by GaryOkie
I'm amazed at your inventiveness - as well as your impatience for a support reply!
Re: New Firmware for AD110 and AD410 Available
Posted: Mon Feb 13, 2023 3:42 pm
by fennec62
Yes I’m children
And now I have doorbell full HomeKit HKV with rtsp record 24h/24h and two way audio on home apple and it’s wonderfull
Thanks for your help
Re: New Firmware for AD110 and AD410 Available
Posted: Mon Feb 13, 2023 4:57 pm
by fennec62
I receive email from Amcrest with firmware in attachement
Thanks a lot to @eliamcrest and @GaryOkie
