Re: Manual Local Record no longer works - get "Window1 local record failed!" error
Posted: Fri Jan 28, 2022 1:27 am
Well I thought I had an idea. While my system wasn't going online for another 40 min in the West Coast I asked my son to go turn on my router so I could do some testing on my Cameras in the NW. Thinking that it might be a Time related issue. However I found out that I moved all old FW cameras over there and might be a different issue for your NEW FW device. However I thought mine wouldn't record when I connected however all of my remote cameras will record remote in the local window, even 3 hours different times zones. So that didn't help. Still no cameras want to load PC-NVR when P2P. I thought if I couldn't record I would try to change the time to my local time and see if that would trick the ASP into believing the camera was local.
For you that might be an idea to try. In ASP click on the Device Cfg, then the camera you want to change time, then System General, time and as a test try to set your cameras time to your local time if in different zones? It might be on the NEW FW that it matters.
Outside of all that. Reset is going to be next thing. I can reset a camera remote and get access to it over P2P. Just need to remember to change admin admin to log in first time and change back after. I do it because worse case I have my son there that can do local if something happens to fail.
Sorry I couldn't be more help
For you that might be an idea to try. In ASP click on the Device Cfg, then the camera you want to change time, then System General, time and as a test try to set your cameras time to your local time if in different zones? It might be on the NEW FW that it matters.
Outside of all that. Reset is going to be next thing. I can reset a camera remote and get access to it over P2P. Just need to remember to change admin admin to log in first time and change back after. I do it because worse case I have my son there that can do local if something happens to fail.
Sorry I couldn't be more help