Page 1 of 1
IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.
Posted: Sun Jul 12, 2020 10:05 am
by DataMeister
On the IP4M-1051 if you mount the camera on its side and change the flip setting to 90 or 270 degrees the pan tilt controls don't reorient to control the camera in an intuitive manner. It would be nice of the pan/tilt controls would follow along with the flip setting.
The pan/tilt controls do seem to re-orient properly when setting flip to 180 degrees.
Re: IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.
Posted: Sun Jul 12, 2020 5:10 pm
by jack7
If you wall mounted the camera on its side, perhaps this could help and you wouldn't need the 90/270 flip.
https://www.amazon.com/Amcrest-Mounting ... B07VMNPKVL
Re: IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.
Posted: Fri Jul 31, 2020 12:33 am
by DataMeister
I have that bracket, but it actually doesn't help because I'm using the horizontal dimension of the camera for extra height.
Re: IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.
Posted: Thu Sep 24, 2020 10:49 pm
by DataMeister
I'm curious how long it should take to fix bugs like this in the firmware.
Re: IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.
Posted: Fri Sep 25, 2020 4:31 pm
by jack7
I don't know your interactions with Amcrest on this, but suspect you might have a long wait.
You could probably achieve intuitive ptz controls using TinyCam Pro android app. Here are the TinyCam settings.
- Screenshot_20200925-164241_Gallery.jpg (85.02 KiB) Viewed 598 times
Re: IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.
Posted: Sat Feb 20, 2021 9:11 pm
by DataMeister
Bump.