Re: Cannot Access Web Interface through Browser
Posted: Thu Oct 31, 2019 6:05 pm
So I don't want to jack your Thread but I have had some issues my self over the last week or so since I moved some items around on my Network. lol. SO I have a 75' patch cable that runs between my main router and my Camera router. SO I moved the cameras router and cameras and use the patch between that router and my Switch. Come to find out that the Cable is bad and while it was working ok between routers the main was only a 100m my switch and Nighthawk router is Gigabit. When everything was working close all was great. While strange thing is The DVR they are connected to is now up here normally in my Security Closet but have been testing and moving things... Anyway found out today after looking in my switch that I am getting some errors that is related to bad port or cable while I tested all ports lol It isn't Port Related. I took a 50' cable I can run strait to the router and run under 1000 between Switch and Router all works without errors. Hook the 75' that is almost to short as it is but has been working for long time under 100m... Anyway I cleared a port Stats connected back up Giga to Giga and
--------------------------------------------------------------------------------
Interface
Receive Statistics
Total Bytes (Octets) 8809567
Unicast Packets 7578
Multicast Packets 38
Broadcast Packets 464
Packets with Errors 0
Transmit Statistics
Total Bytes (Octets) 876994
Unicast Packets 4722
Multicast Packets 80
Broadcast Packets 20
--------------------------------------------------------------------------------
Ethernet-like
Frame Check Sequence (FCS) Errors 2344
Single Collision Frames 0
Late Collisions 0
Oversize Packets 0
Internal MAC Receive Errors 905
Received Pause Frames 0
Transmitted Pause Frames 0
FCS and the other errors only happen when the port is running giga to giga. I changed the port down to 100m until I can get a new cable this weekend installed. It has been over an hour and not 1 error so far. These number above off my switch is running on port for less then 5 minutes lol...
--------------------------------------------------------------------------------
Interface
Receive Statistics
Total Bytes (Octets) 8809567
Unicast Packets 7578
Multicast Packets 38
Broadcast Packets 464
Packets with Errors 0
Transmit Statistics
Total Bytes (Octets) 876994
Unicast Packets 4722
Multicast Packets 80
Broadcast Packets 20
--------------------------------------------------------------------------------
Ethernet-like
Frame Check Sequence (FCS) Errors 2344
Single Collision Frames 0
Late Collisions 0
Oversize Packets 0
Internal MAC Receive Errors 905
Received Pause Frames 0
Transmitted Pause Frames 0
FCS and the other errors only happen when the port is running giga to giga. I changed the port down to 100m until I can get a new cable this weekend installed. It has been over an hour and not 1 error so far. These number above off my switch is running on port for less then 5 minutes lol...