Two IP5M, doorbell AD410, and 4108 NVR

Have some questions or having issues with your DVR/NVR(s), Post them here for the mods and other users to assist you with.
Post Reply
umairabbasi
Posts: 11
Joined: Mon Apr 05, 2021 12:44 pm

Two IP5M, doorbell AD410, and 4108 NVR

Post by umairabbasi »

Setup (not physically wired LAN into NVR)
IP5M on D1
Doorbell on D2
IP5M on D3

All viewing street in front of house. Why is it as a car moves from D1 through D3 but D3 one does not see the vehicle?

All on same resolution and bandwidth and IP5M’s are POE into a Amcrest poe switch. Doorbell has a dedicated (wired in) access point roughly 5 feet from it.
umairabbasi
Posts: 11
Joined: Mon Apr 05, 2021 12:44 pm

Re: Two IP5M, doorbell AD410, and 4108 NVR

Post by umairabbasi »

Follow up: one would also see this if going in the opposite direction. D3 sees vehicle and D1 does not.
User avatar
Revo2Maxx
Site Admin
Posts: 5906
Joined: Sat Jun 15, 2019 3:05 pm

Re: Two IP5M, doorbell AD410, and 4108 NVR

Post by Revo2Maxx »

I would double check FPS, Encoding type and network stability.

4108 what model?

4108H, 4108E, 4108-HS, 4108E-HS, 4108-A2, 4108E-A2? Sorry don't know what one we are dealing with

I would look to make sure they are not working on H.265 if they are then move then over to H.264 and see if that cures the issue.
Be Safe.
Post Reply