I have an IP4M-1028E that got some water in the RJ45 connector and seems to have shorted the connectors on the female connector. I cleaned up the connectors and got the camera working again, but then it quit a couple days later.
I have cut the female connector off the end and wanted to replace it in order to still use the camera, but I found that there are only 6 wires instead of 8.
Does it use the standard Type A pinout? The wire colors seems to be the same, just missing the Brown/White and Blue/White wires.
IP4M-1028E pinout
-
- Posts: 48
- Joined: Mon Apr 22, 2019 9:55 am
Re: IP4M-1028E pinout
and13345,and13345 wrote: ↑Thu Jul 25, 2019 8:12 pm I have an IP4M-1028E that got some water in the RJ45 connector and seems to have shorted the connectors on the female connector. I cleaned up the connectors and got the camera working again, but then it quit a couple days later.
I have cut the female connector off the end and wanted to replace it in order to still use the camera, but I found that there are only 6 wires instead of 8.
Does it use the standard Type A pinout? The wire colors seems to be the same, just missing the Brown/White and Blue/White wires.
This article will assist with this:
https://support.amcrest.com/hc/en-us/ar ... tor-Wiring