Amcrest Forum

hey guys,
I am facing problems to login into IP address 132.168.1.108, i was wondering if anyone of you could help me with detailed steps to login into the IP.
Thankyou.

Is that a typo? Do you mean 192.168.1.108

Not enough info, but you won't be able to login unless you are on the local network.. if you're on the outside you have to set up NAT on your router. If you are on the local network, make sure you're specifying the same port the camera is on.

Like Mystick said, you haven't provided enough information. Also, this seems like a local network IP address. You need to mention the proper configuration.

Anyway, if you're talking about router login, then check out this guide for more details.

whta is subnet mask in ip camera?

http://nadin-co.ir/camera-4

Logging through ip does not create the problem but which device you are using and what kind of ip you are trying to access its matters, https://epsonsupports.net/blog/how-to-f ... ine/helped me to get the login page for the ip address.