Issue activating IP8M-2496 cameras with Synology surveillance station

Have some questions or having issues with your DVR/NVR(s), Post them here for the mods and other users to assist you with.
fiori
Posts: 1
Joined: Sun Feb 10, 2019 10:32 am

Issue activating IP8M-2496 cameras with Synology surveillance station

Postby fiori » Sun Feb 10, 2019 10:36 am

I purchased 2 Amcrest IP8M-2495EB cameras to add to my Synology NAS using the surveillance station software. I have 4 other Amcrest Cameras connected to the same system. Before anything, I tested both cameras and received the same results. I tried several patch cables and 2 POE+ switches and received the same results.

When I setup the camera in the surveillance station, the camera type is preconfigured for the same model. I enter the IP address and make sure the password is the same. The camera passes the test and I can see the video. When the system tries to activate the camera, it fails. I have tried various methods but have not been successful. I have sufficient licenses for the system.

Any ideas would be appreciated.
Gerry

marcust3
Posts: 1
Joined: Wed Jun 26, 2019 10:45 am

Re: Issue activating IP8M-2496 cameras with Synology surveillance station

Postby marcust3 » Wed Jun 26, 2019 10:53 am

Edited: Try putting everything on static IPs. Also, delete and reinstall licenses.

Reboot NVR


Return to “NVRs / DVRs”

Who is online

Users browsing this forum: No registered users and 0 guests