Amcrest Forum

Also another thing I didn't mention as well. VBR isn't that great of a setting for good Security Setup while it can work there just to much that could happen and not get recorded right for me anyway.. I keep mine on CBR and the cameras that come with VBR as default I change them all to CBR.. Also so...

Hello and Welcome to the Forum Sadly using a NVR or Camera with a FW on it from 2019 or 2020 and or even 2021 if there was one is going to have that issue.. However while it is a pain it is a Safety in place from keeping a system signed in while the Owner is away from the system after a set time tha...

Hello and Welcome to the forum So your camera is Higher Grade AI camera then mine and as such offers more options Scene Change is a IVS option I am going to guess if within your Stack of AI things built into your Camera.. Then in the Option under Rules settings there is info for PTZ and things you c...

Under your Storage Schedule what do you have your Pre-Record time set to? Also your Post Record is only setup for 10 seconds.. I would up that to 45 to 60 seconds personally Also why are you recording at 10 fps, and such a low Bit Rate? In this motion Critical moment I would have a 4mp camera setup ...

When you are on your CELL phone app Amcrest View Pro that you can DL for free off the Google Store or Apple Store. Then when your looking at the page with your device there is a button at the top of the app on the left 3 dots and 3 lines. Click that then click the Push Notifications Screenshot_20210...

Sadly I am not sure what size it uses outside of the 9v 800ma that it requires to work (One of the reasons it isn't 2.1mm).. Also note that the monitor for the camera is only 5v 2amp or a 3.7 Lipo battery..

When you have View Pro up for your camera in playback there is a time bar at the bottom for me always has date and ALL in it if you click that area it will come up with an area where you can then choose what type of playback you want it to search for, Then click Start Playback and anything that it r...

Auto is setup for your Scheduled times when your Recorder turns on it will start recording as you have setup it to record.. Then in the Settings of a Camera one can pick the type of Stream it is recorded on and or in an event that is setup. However if it is setup to Auto it will Record both stream f...

Hello and welcome to the forum Sadly there is a load of information that is lacking to have a good answer at your question.. However here is some things that can help figure this out.. 1, Did you choose anything different within the NVR on what is going to record when there is Motion or full time? 2...

Hello and Welcome to the Forum So here is my idea of what needs to be done.. Do a Factory Reset and this time Leave the Network cable out of the camera, Then Setup the Camera using the Amcrest Smart Home app.. Once this is setup and the camera is connected to your Wifi on a Wifi setup only your came...