Amcrest Forum

Hello and welcome to the forum..

In general if you look at the top of the WebUI for the camera there should be an area that says Cloud. you click that and enter your details for your cloud and it should go into that area for your cloud and add the camera to your account.

I was going to say that if you found out that the issue is the Zoom and not power related that I could fix the camera. I have a 853 with 125hrs or maybe little more but not much I would have to connect it and find out. I will admit that I pulled it from service after I updated the FW to the new one ...

My guess is that the info for what your asking for would be best found off the Github post and or from the users there. There are people on there that deal with this kind of stuff much more often then others on the Amcrest Forum. While I am not saying there isn't anyone on the Forum here that wouldn...

Oh 1 last thing, I would change your IP from that IP as it might be fighting other devices... Make it anything but 108 that is within your network range anyway..

Ok Click operations and the rest you can see in the picture..

So I have had my doorbell on the NVR for some time. Then it went offline I look at the area where it was and it says devices mis match? What? So I thought ok maybe Wifi issue, I test with SH app and I am able to connect so it is working on router ip no issue. So I then look and it is showing that it...

So in this case the best thing to do is connect to your Network Switch or Router ethernet port. Then you will need to connect the camera over the NVRs normal ethernet ip range rather then the Switch Ip range. for instance my main router with all my switches are on 10.0.0.xxx and my IP for my 5232E-1...

Here is an idea, Get some Alcohol and test the voltage input area of the PCB. Once you find what Sizzles report it back Keep in mind that it should be 99% pure Isopropyl Alcohol (IPA). Where there are some that use other keep in mind that not knowing what you are doing can cause more damage then goo...

So here is something I would try. Adjust the position of the camera down more so it is picking up less of the sky. Also double check the Smart Home app and see if there is something in the settings that is WDR. If it is enabled disable it. Don't use any 3rd party hardware or software to make changes...

I would look at doing a Factory Reset to the NVR. What I do before doing so is take apicture of how you have the NVR setup. Even if you have to do this over the NVRs GUI. I use WebUI most times for tihs. However keep in mind that setup of the NVR would be best on the GUI because the IP of the NVR no...