Amcrest Forum

So in this case the best thing to do is connect to your Network Switch or Router ethernet port. Then you will need to connect the camera over the NVRs normal ethernet ip range rather then the Switch Ip range. for instance my main router with all my switches are on 10.0.0.xxx and my IP for my 5232E-1...

Here is an idea, Get some Alcohol and test the voltage input area of the PCB. Once you find what Sizzles report it back Keep in mind that it should be 99% pure Isopropyl Alcohol (IPA). Where there are some that use other keep in mind that not knowing what you are doing can cause more damage then goo...

So here is something I would try. Adjust the position of the camera down more so it is picking up less of the sky. Also double check the Smart Home app and see if there is something in the settings that is WDR. If it is enabled disable it. Don't use any 3rd party hardware or software to make changes...

I would look at doing a Factory Reset to the NVR. What I do before doing so is take apicture of how you have the NVR setup. Even if you have to do this over the NVRs GUI. I use WebUI most times for tihs. However keep in mind that setup of the NVR would be best on the GUI because the IP of the NVR no...

Ok sorry maybe I didn't understand well enough.. So I understand better, You are able to connect with ASP to the cameras but not able to connect with the NVR? or is it both NVR and cameras that have hard time connecting when you are having connection issues? I mean I did have a 2108E-HS that had eth...

So here are a few things not covered... One check Ethernet cable from computer to router/hub/switch. Replace and insert into a different port on connected device. If you have a managed Switch, I would look at the port data for the computer and see if there is any high number of errors. Outside of th...

Hard to say but with the ash line you are limited to what you can change in the cameras settings. I would pick one remove from any 3rd party hardware or software. Then do a factory reset and setup using Amcrest Smarthome app. Once setup see if color looks better then it did before reset. Then add ba...

Yes the issue with CCA cable is that it can be kind of hard to understand if someone bought good cable because so many people are cheating by trying to make the cables look good. Even cable that has CCA posted on the cable shows info about UL and TIA/EIA Verified and CCA would never get a TIA rating...

Once and if I ever find out what the chip is lol. I will post some still shots of the repair. First one is already there with the Chip in place. With the removal just need to use hot air with long bent tip to get the heat down to that chip area. I am not sure if it is glued my guess is that it might...

Not sure what ver you are on, I am on the last one offered on the Website V4.000.00AC002.0.R, Build Date: 09-02-2022 It don't work on that FW so if that is the one they are telling you to upgrade to would be interesting if it works for you. I have done a Factory Reset of my NVR and that didn't corre...