Search found 3399 matches

by Revo2Maxx
Wed Dec 01, 2021 2:25 pm
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 17
Views: 721

Re: NVR NV4108 Interference from other REMOTES

Well I can tell you that it is nice to have a Reset button when they work. Yes if the reset was to take place by pressing the Reset button you will 1 hear a Beep right after turning on, Then when it starts up it will be just like it was when the NVR was bought NEW... I have a good FEW NVR's and DVR'...
by Revo2Maxx
Wed Dec 01, 2021 12:00 pm
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 17
Views: 721

Re: NVR NV4108 Interference from other REMOTES

Yes it can be a Pain to get these to reset off the button. In truth the system Reset in side is to protect the Owner. So if your able to log into the Device I would start with a Software Reset. With your system on, Right click screen and then Main Menu, Then click on System, Then on the left bar cli...
by Revo2Maxx
Wed Dec 01, 2021 10:57 am
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 17
Views: 721

Re: NVR NV4108 Interference from other REMOTES

Itcacman Hello and Welcome to the Forum I would look over your DVR setup and see if you have them setup for Tour if you do it will cycle though the channels in use or not if it wasn't setup right. Also best to look at the top of the DVR for a circle looking thing. It can have a Lock on it or withou...
by Revo2Maxx
Wed Dec 01, 2021 12:45 am
Forum: Amcrest View Pro
Topic: AVP no pictures displayed during push notification
Replies: 2
Views: 50

Re: AVP no pictures displayed during push notification

Another thing to try. For testing anyway. Go to playback, then pick the image at the top right, then when the Device list comes up you need to look close because only the last Min will be displayed you will want to set a time you think there was some images, (You will have to pick a day before it wi...
by Revo2Maxx
Wed Dec 01, 2021 12:33 am
Forum: Amcrest View Pro
Topic: AVP no pictures displayed during push notification
Replies: 2
Views: 50

Re: AVP no pictures displayed during push notification

A couple of things can happen. So asking for a Jpg without having them turned on could cause this (Give you a time line but no image) However you said you can click on ASP and Bring up the info from your cameras, This has me wondering if the NVR has it enabled as said above or that your camera isn't...
by Revo2Maxx
Mon Nov 29, 2021 6:24 pm
Forum: IP Cameras
Topic: Wall mount issues
Replies: 1
Views: 48

Re: Wall mount issues

Hello and Welcome to the forum I am not sure where you got the Mount from was it Amcrest or a 3rd party? From what I read in the Manual for the camera the outside is 122mm and from what I can find the mount is to house a 122mm camera and so in theory that camera should be right to the edge.. Maybe t...
by Revo2Maxx
Mon Nov 29, 2021 3:44 pm
Forum: NVRs / DVRs
Topic: 4216E-AI NVR Reset PWD QR email
Replies: 0
Views: 39

4216E-AI NVR Reset PWD QR email

Hello all and I am looking to see if anyone that has the 4216E-AI or any line of the AI NVR like 4216-AI, 4208-AI, 4208E-AI or the 5216-16P I am not sure if any of the other 5xxx series would count.. Anyway here is what I am looking for if you were able to seeing I want to try and find out if this i...
by Revo2Maxx
Sun Nov 28, 2021 7:31 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 17
Views: 1025

Re: NV4108-HS Motion Detection Schedule

I am not sure really. If it was setup h.265 then it should be working in that.. I am going to guess it could be a Speed issue maybe. There are times that if there is an issue it will drop to Sub stream it might be that h.265 is the issue because in theory it was some time that it would only play in ...
by Revo2Maxx
Sun Nov 28, 2021 1:08 pm
Forum: IP Cameras
Topic: I changed routers, how can I change the IP of two cameras
Replies: 4
Views: 88

Re: I changed routers, how can I change the IP of two cameras

You will want to make your PC have Static IP. You can do this in a Temp setup or as a constant it is up to you.. However to make it easy I will tell you how to do it as TEMP setup. (Win 10) Press the Windows Key and X then Press W, This will bring up your Networking area Then click Ethernet, then on...
by Revo2Maxx
Sun Nov 28, 2021 12:19 pm
Forum: NVRs / DVRs
Topic: login security question
Replies: 1
Views: 87

Re: login security question

Well there are a few things that you can do and this is how I would do it. First log into your router and look for settings that talk about Restriction of users in your router Please note this is a step that will or can help from here out, In my Router it is under Advanced, Log in Control. (I would ...