Amcrest Forum

You don't have to set up motion detection to get records stored. App Playback of Normal(green) and Motion Detect(yellow) records works fine for me with SD card storage. Good Amcrest app tutorial on this after SD card installation stuff in this video: https://www.youtube.com/watch?v=Xz-Z5jMDDvc&t...

I had the same problem(no records message) with a 2m-858 and only use the SD card for playback records. I figured out my problem. Try this: IE View Pro - works as it should For Android View Pro, IOS View Pro for ipad, and Surveillance Pro: When specifying record type, use All, or General (green reco...

Thank you for sharing the wifi security information. I have wired and wireless on two cameras(LAN), so I was curious. Each normally uses wired. Today, I did another test on the 4M-1026. I used IE View Pro and the following report programs: Amcrest IP Config android Network Scanner app realtime stati...

If you want to stop wifi transmissions between the router and camera, you could try removing the camera antenna or putting a good small metal plate at the camera antenna shielding it from the router location. In my experience, no wifi signal disconnects the camera wifi network specified. Unchecking ...