Amcrest Forum

Ok sorry maybe I didn't understand well enough.. So I understand better, You are able to connect with ASP to the cameras but not able to connect with the NVR? or is it both NVR and cameras that have hard time connecting when you are having connection issues? I mean I did have a 2108E-HS that had eth...

So here are a few things not covered... One check Ethernet cable from computer to router/hub/switch. Replace and insert into a different port on connected device. If you have a managed Switch, I would look at the port data for the computer and see if there is any high number of errors. Outside of th...

Hard to say but with the ash line you are limited to what you can change in the cameras settings. I would pick one remove from any 3rd party hardware or software. Then do a factory reset and setup using Amcrest Smarthome app. Once setup see if color looks better then it did before reset. Then add ba...

Yes the issue with CCA cable is that it can be kind of hard to understand if someone bought good cable because so many people are cheating by trying to make the cables look good. Even cable that has CCA posted on the cable shows info about UL and TIA/EIA Verified and CCA would never get a TIA rating...

Once and if I ever find out what the chip is lol. I will post some still shots of the repair. First one is already there with the Chip in place. With the removal just need to use hot air with long bent tip to get the heat down to that chip area. I am not sure if it is glued my guess is that it might...

Not sure what ver you are on, I am on the last one offered on the Website V4.000.00AC002.0.R, Build Date: 09-02-2022 It don't work on that FW so if that is the one they are telling you to upgrade to would be interesting if it works for you. I have done a Factory Reset of my NVR and that didn't corre...

People are just always trying to make things something they are not.. First setting up the camera using any method of App or WebUI local to the device in question is nothing more then connecting to the IP that the Router gave it when it was turned on. Then once setup and you setup P2P the only thing...

Hello and Welcome to the Forum So I have this setup in another NVR for some other cameras and it has worked without an issue. So after your post I was like humm that seems odd. Then I seen you were triggering to record all 1,2,3,4,5 channels on the posted event so I thought maybe they did something ...

So digging into my other brand ip ptz camera I thought it would be an easy repair when I connected it to one of my older POE NVRs and stopped working on POE.. well today thought I would take it down and take a look.. seems the issue I thought it might be isn't. Now have to find someone with like ptz...

Can't tell you about reolink as not sure how they are setup.. I would double check if having issue with Amcrest to make sure that it is normal FTP setup and not a SFTP if the camera being used has the option. Normally will work as long as the Port and user and password is correct. Some servers will ...