Search found 2239 matches

by Melvin
Thu Jun 13, 2019 12:45 pm
Forum: NVRs / DVRs
Topic: Video loss settings query fail
Replies: 1
Views: 165

Re: Video loss settings query fail

Hi stock,

Do you have same issue with others channel too or only on channel 03?
by Melvin
Thu Jun 13, 2019 12:43 pm
Forum: NVRs / DVRs
Topic: 2 channels failed on AMDV10804. Bad Power supply?
Replies: 1
Views: 134

Re: 2 channels failed on AMDV10804. Bad Power supply?

Hi oboudreaux,

I think you already tried most of the troubleshooting seems to be power supply part, I would also recommend to check cameras power adopters.
by Melvin
Mon Mar 25, 2019 11:41 am
Forum: NVRs / DVRs
Topic: 2 NVR setup
Replies: 1
Views: 38

Re: 2 NVR setup

Hi amcrestnoob,

You can have two NVR at same network the local IP address and port numbers of NVR's should be different when you are adding it for remote view through IP or domain you can use public IP and the respective port number of the NVR.
by Melvin
Mon Mar 11, 2019 3:33 pm
Forum: Amcrest View Pro
Topic: Amcrest View Pro
Replies: 2
Views: 132

Re: Amcrest View Pro

Hi tfran1990, If you added your cameras using public IP address or ddns you will be able to view from WAN fine, But you may not see the cams on same network try adding the cams on device manager using local IP address and the TCP port number when you on the local network you can switch viewing with ...
by Melvin
Thu Mar 07, 2019 1:23 pm
Forum: IP Cameras
Topic: Constant Red Light
Replies: 2
Views: 280

Re: Constant Red Light

Hi gembob,

Hard wire to router try different port and different Ethernet cable hard reset it, try pinging from the network.
by Melvin
Wed Mar 06, 2019 6:28 pm
Forum: IP Cameras
Topic: 1080p camera on 4k monitor
Replies: 2
Views: 49

Re: 1080p camera on 4k monitor

Hello jmf1964, Please try the below steps for issues with the web interface of IP camera/DVR showing disproportionate image in Internet Explorer. 1) Please navigate to C:/Program Files. 2) Go to the folder named 'Webrec'. 3) Go to the folder named 3.0.0.3 4) Right Click on the WebActiveX and go to '...
by Melvin
Tue Mar 05, 2019 1:32 pm
Forum: NVRs / DVRs
Topic: Amcrest NVR with TP Link Powerline Adapter
Replies: 1
Views: 49

Re: Amcrest NVR with TP Link Powerline Adapter

Hi HiveHomeSolutions,

It might be the IP address issue, Since your second camera connected to power line adopter it will kind of make it as sub network and you may not be able to ping that from your ATT connected devices, Try pining the camera.
by Melvin
Sun Mar 03, 2019 11:42 am
Forum: Amcrest View Pro
Topic: iOS app 'night" failing but PC app works ok
Replies: 1
Views: 45

Re: iOS app 'night" failing but PC app works ok

Hi JStateson,

Use web interface for any camera settings iOS app will make temporary changes and some of the options you can change only with respect to that particular device.
by Melvin
Sun Mar 03, 2019 11:38 am
Forum: NVRs / DVRs
Topic: Firmware Update for AMDV10818-H5
Replies: 2
Views: 49

Re: Firmware Update for AMDV10818-H5

Hi MKPelican,

AMDV10818-H5 is different than AMDV10818, AMDV10818-H5 is our new series DVR's and comes with latest firmware.
by Melvin
Sun Mar 03, 2019 11:11 am
Forum: IP Cameras
Topic: Using IP3M-941 with IR LED lamp
Replies: 8
Views: 432

Re: Using IP3M-941 with IR LED lamp

Hi mupimohan,
If you are using any IR lights behind window or glass you will face glare issue, you can try using IR illumination outside window make sure to IR wave length is 850nm with amcrest cameras.

Go to advanced search