Amcrest Forum

Hi I have an amcrest 32ch NVR I previously had problems with 4 cameras going missing off my network of 22 cameras. Fortunately I checked my router (using gateway 192.168.1.1) and saw 4 extra amcrest cameras that were showing on my nvr. I wrote down all the IP addresses (192.168.1.xx)from the router,...

Its the same camwera as the others it worked fine last week The only potential headache I see as that 3 of my cameras were well over a hundres feet from the router, 2 of them did not work and this one did. it worked fine. So the 2 that did not work, I put an inline booster in, fiexed them immediatel...

I think my ethernet port is connected to the router and the cameras (past the 16 ports) all connect to the router, is that not correct?

thanks

I have an amcrest 32ch NVR with 16 cameras connected to it. Initially only 14 of them worked, but the 2 that did not, were too far away from the router. So I bought 2 x network boosters, wired them inline to the 2 non-responding cameras and they then worked fine. All was fine until yesterday, now on...

Hi have amcrest 32ch NVR. The 1st 16 cameras are a mixture of about 10 plugged into 10 of the 16 ports on the rear. The others are in two different PPPOE network switches The 1st 16 work fine. Apart from one which I will mention in a sepaarte thread. I added 8 more cameras today and none of them app...

the device manager tip worked perfectly, thanks

Hi have a 32 channel amcrest NVR, all works great, except a tiny problem. I originally setup the nvr at home then took it to work. It all setup fine there. My web long is fine, I can view the cameras online. Also my amcrest view pro is fine, I can view cameras on that as well My problem is that I ga...

Hi. I have an amcrest DVR with 8 x yellow ports on the back and 8 x grey ones. I have some extra cameras so I got an 8 port PPPOE hub. But, whereveer I plug it in, it does not detect the cmaeras. DO I have to manually configure the ip address and gateway, or is there some other trick. Also do I need...