Amcrest Forum

Ok I can't say that it will work for your camera. However I just ran this command for testing the time on my AD410 and I get the result back as expected. So it might work with your ASH43. /cgi-bin/global.cgi?action=getCurrentTime That command will get the current time info /cgi-bin/global.cgi?actio...

Ok going to try that and thanks! I also wanted to say that the only way I could get anywhere with an ethernet connection was by using my netgear switch. I have it coming out of port 1 of my linksys router and the switch's gateway ip is set to the router's ip of 192.168.0.1. I do not know why unless ...

How to use the IP4M-1041B cam with a non Amcrest NVR: This would be better if you have a 2nd router and not recommended for those inexperienced dealing with networks and routers. You need to first get the ip subnet of the NVR. I'm going to use heimvision hm241 as an example. Mine uses a subnet of 17...

If I even had a command I could issue through terminal in linux or something to set the date and time...
Before anyone ask...It's not connected to the heimvision nvr. It's only connected via wifi to the router and
I'm accessing the stream in ispy

t4f21802_a1e73d7d_2048.jpg 3242sde3s.jpg 779a41a_23c15bec_2048.jpg Once the Amcrest Smart Home Android App moves past the screen to input password and recovery email....it will no longer connect to the cam unless you reset the cam and go through setup again. It's not possible to set the date and ti...

This would benefit users doing online or offline setups for the ASH43-W IP Cam. First let me say this cam is not an easy task to get setup. This may be because I do not have internet on the router it's intended to work with. It took me an act of congress just to get the cam viewable using free ispy ...