Amcrest Forum

What is the consensus on the best firmware version(s) for the AD410? I ask because I'm running 230810 but it frequently drops its wifi connection (though it is very close to a Unifi AC Pro hotspot and reports that it gets good signal). I'm pulling an RTSP stream from it using Frigate in HomeAssista...

Thanks Revo. I was actually looking for the colour to stay the same (i.e. the green/light blue colour it normally is when it's on) - as opposed to turning the LED off (I can see how my original post may have been vague so my apologies!)

Hi everyone, Just wanted to see if anyone knew whether it was possible to either: - Customise the LED ring around the button of the AD410 (e.g. change colour) - Currently when the 'talk' button is pressed on the Smart Home app, the LED ring changes to a dark blue. Is it possible to turn this feature...

Thanks Gary - should have thought to look at Android settings rather than app settings. For me, "zencam" is human detection and "push_default_ringtone" is door button press. I don't have a "push_default_alarm" or "push_four_tone_doorbell_long_tone" in my setti...

Hi everyone, I am running the Amcrest AD410 with the Amcrest Smart Home App. One thing I can't seem to customise was the ringtone when someone rings the doorbell. Currently, when my phone is NOT on silent, it seems to play the ringtone I have on my phone for phone calls for about 2 or 3 seconds at a...

Hi all, When using my AD410 in night mode, I can always see a bright line appear on the brick pylon in front of my camera. Does anyone know what may be causing this and anything I can try to fix this? To the naked eye, there is nothing really there where the line is. The only thing I can think of th...

No problems - I understand. The last thing I want to do is break the doorbell too. I've tried looking for the amcrest wireless chime but it seems like it's not available for sale anymore (discontinued product?). I think worse case scenario I might have a go at setting up home assistant and playing a...

Thanks Revo2Maxx. You've got me a little worried now with low voltages on button press when configuring the AD410 with a digital chime. Would you suggest I change this to a mechanical chime (not sure what this does, but doesn't seem to change the voltage at the terminals on the AD410), or perhaps ev...

Thanks Revo2Maxx. I probably should have made the following clear: I only have an indoor unit and outdoor unit. There is an optional additional chime (connected to [T and 6]) and additional transformer (connected to [7 and 8]) in the wiring diagram that I do not have. These terminals are open and no...

Thanks Revo2Maxx. The intercom is from the BTicino Linea 2000 range. I think the model number is 363811 (https://catalogue.bticino.com/BTI-363811-EN). The item looks identical to what I have and the wiring diagrams I've found consistent with mine, with the exception of the voltages (I can provide th...