Amcrest Forum

Thank you Revo2Maxx, big time. And Pogo for the manual link. I didn't realize that this camera with the spotlight was NOT a Smart Home type. As long as this customer can get some type of notification that it was triggered by human motion, that works fine. I have installed many NVRs, POE IP cameras, ...

I would appreciate someone's assistance guidance in how to properly setup a 5MP IP PoE AI Camera, IP5M-B1276EW-AI to notify the user that it has detected human motion. I assume this would come across in an email or would it flash across the top of the Smart Home app. The camera does seem to light up...

One of my customers has a AD410 doorbell camera that looses connection 2 to 3 times each day for short periods. I have replaced the camera with a new one. Place a mesh Wi-Fi wireless access point nearby. This TP-Link Deco WAP is set to the A/P mode therefore it is NOT issuing new IPs but just relayi...

Ok well good for Amcrest and the users. Bad for me cause I'll have to climb up there may or rent a cherry picker to get there and rest it since my sub didn't write it down or lost it. Thank you for confirming what I suspected. Have a good weekend. John

Is there a way to access and/or reset a PTZ camera IP2M-853EW having lost the password with the default username admin. This Amcrest camera is mounted on a 30 ft narrow triangular tower (a typical old Ham Radio mast). I can access the PTZ camera internal configuration site log-in, 192.168.0.134 on t...

I have recently been installing ADC2W smart home security motion cameras with spotlights, integrated to an NVR on the same network. I would appreciate tips, suggestions on how best to setup it up in the Smart Home app to detect motion to alert one on the that something triggered it. I assume that th...

Thank you for this suggestion. I did end up replacing the ADC2W in the front and that cured the problem. I apologize for my late response. Was distracted by some home emergency repairs and finally have time to respond. John

I will add that I have installed well over 150 Amcrest cameras into various NVRs, this is the first time that I have setup the ADC2W version and maybe I missed a step. At this customer site, I also installed the AD410 doorbell camera to the same Wi-Fi network without any issue, basically it remained...

Having recently installed (2) new ADC2W Security Cameras to the customer's home Wi-Fi network, using the Smart Home app, both of the units will continue to verbally announce out-loud that they have successfully connected to the Wi-Fi network. The cameras are accessible thru the Smart Home app, easil...

OK thank you sir. I will follow your suggestion. John