Amcrest Forum

nv5216-8p here, mp4 is in the export list, but only ~20MB/s, probably due to encoding/decoding.
haven't checked the raw files in the HDD, likely dav.

Yes IVS option now available after the update.

BTW, AVP doesn't have ivs push (which is why we started the DMSS thing) :| DMSS has ivs push but somehow the push is like 10 seconds later than regular motion from AVP. Anyway, will just wait for the new AVP and see how that goes. update: just for kick I disabled the mobile push in DMSS and re-enabl...

anti dither at the default 5s, and default record delay 10s, so it would be about 15s + motion duration per clip; but guessing it should just trigger a mobile push as soon as something triggered (while the recording is still ongoing).

on the camera's ivs setting page, I do have both record, and snapshot enabled.

Hum, interesting. Where can I select the type of push?
On my end it's only one tick box - either enable to disable the intrusion alarm; no option to choose video or image push.

duh not sure how I've missed the intrusion alarm option that's right above the tripwire, but it shows up today. Intrusion alarm now works even though it has quite a bit of delay; am guessing it only pushes the alarm when the video recording has finished (not pushing out as soon as intrusion detected...

Just found another quirk...
The DMSS mobile app doesn't have IVS-intrusion push...it has tripwire alarm thought, which doesn't work for intrusion trigger, phew...
Could you check if ivs-intrusion push works on your end?
stuff missing/not-working here and there is just so bizarre

Yes the DMSS method works. Suspecting that the EasyViewer and EasyViewerLite also work (these two are cited in one of the the password reset page on amcrest's website). Maybe the htmicrochip server accepts incoming mails only from specific email domains, or these app use a specific format that the s...

I came across this issue too; onvif cameras will not auto-add after a NVR reboot. Make sure the "multicast & broadcast" under the security or system tab is enabled on all the cameras; otherwise they won't auto-add. Could be something else too as mod mentioned above, but this just came ...