Amcrest Forum

I just got this today and it works. I had to initialize it first on my phone using the Reolink app and the app upgrades the camera's firmware before I had even done that. No choice. Update. I added it via the NV4116E's web interface and it took me a couple of tries before it worked but, the resulat ...

Yes, I got that. I have my NVR GUI connected to my living room TV. It is only baseband video because that's the cable I have in the wall between the two devices. It allows me to view my cameras easily. Looking at your video it was clear to me that you were on the NVR from the data displayed for each...

Thanks. Some of my cameras work using this and some do not. My LAN is in the series 192.168.1.n so any address in the 10.1.1.n range is obviously unreachable without a bridge which the NV4116 does not seem to provide for http. It works on some cameras in my IP range that are cnonected to my LAN and ...

Sorry for the delay in replying. I watched your video and I dug up IE and downloaded the web_plugin and yes, I got 16 camera places. I was able to drag the camera images around to various places. It works but I was unable to make IE WebView save my layout. However I don't really care as I know that ...

I have a new NV4116E-A2. Connected to the PoE ports are 4 x Amcrest and then 3 x IP cameras on my wired LAN plus 2 x Amcrest wireless cameras that obviously end up on the wired LAN too. I just connected a third SV3C https://www.amazon.com/dp/B081Q47ZZ7?psc=1&ref=ppx_yo2ov_dt_b_product_details ca...

Good comments Revo. I shall take a look this weekend. 8K audio should be plenty for these mics. It'll cut off at 4kHz by Nyquist. Problem is, some of my cameras are connected to PoE ports on the NV4116E. I cannot (so far) get to these any way but through the NVR's web page since these cameras are no...

I have seen that screen. I can get to it, no problem. I think that I already set both the mic and speaker to 100 (there was no way to make it go to 11...) I am surprised Amcrest still forces the use of IE which is deprecated by Microsoft.

Thanks again.
Pete

@jack7, @Revo2Maxx, Hmm. Feel stupid... I left ASP running on one screen whilst typing my reply here on another. The sound system we up too. As I type, I hear rumbling noises. So yeah, I had left one camera, this one, https://www.amazon.com/dp/B081Q47ZZ7?psc=1&ref=ppx_yo2ov_dt_b_product_details ...

I have 3 x IP8M-T2499E, 2 x ASH43-W, 1 x IP5M-T1179EW and two other PTZ non-Amcrest cameras connected to an NV4116E-A2. They all work fine with video. I have no sound using ASP on Windows 10. Sound works fine on all camera that have microphones using either Amcrest View Pro or TinyCam Pro on android...

Revo,

Thanks for confirming that it will work. Yes, I shall keep the wiring separate. It seems that the 4116E has its own DHCP server and anyway the wiring is separate so the camera will pick up a 10.0.0.nnn address.

Thanks again.