Search found 6 matches

by Nikotine
Sun Jan 29, 2023 5:14 am
Forum: Amcrest Smart Home
Topic: New Firmware for AD110 and AD410 Available
Replies: 75
Views: 57435

Re: New Firmware for AD110 and AD410 Available

GaryOkie wrote: Thu Jan 26, 2023 12:15 pm Hmm, "devs would be back next week"... that sure sounds like Amcrest's developers are in China, off for their Lunar New Year.
Was there ever any doubt about that?
by Nikotine
Mon Jan 23, 2023 3:18 pm
Forum: Amcrest Smart Home
Topic: New Firmware for AD110 and AD410 Available
Replies: 75
Views: 57435

Re: New Firmware for AD110 and AD410 Available

This is a bit off-topic so mods feel free to move/remove. Here are my setup notes for offline AD410: https://gist.github.com/kantlivelong/c89c069b090ea0d8d10fea09da185166 I personally use Home Assistant, Node-RED, and amcrest2mqtt to work with the device locally. Thanks! Don't you miss to be able t...
by Nikotine
Sat Jan 21, 2023 4:03 pm
Forum: Amcrest Smart Home
Topic: New Firmware for AD110 and AD410 Available
Replies: 75
Views: 57435

Re: New Firmware for AD110 and AD410 Available

2. I was able to connect to the setup hotspot from my desktop and pull the config and while looking I noticed that the device was set to use WPA2-TKIP which is disabled by default on many newer wifi access points/routers. In my case I needed to set it to WPA2-PSK-AES which I did by running: curl --...
by Nikotine
Tue Oct 12, 2021 6:31 am
Forum: IP Cameras
Topic: AD410 doorbell: MAC address changes and password no longer works
Replies: 13
Views: 5623

Re: AD410 doorbell: MAC address changes and password no longer works

Definitely something wrong here. I did a reboot and now it's using the original MAC address again, but the password still isn't working. I'm going to factory reset once more.

I am not using mesh network, I just have two access points who are both broadcasting an SSID on 2.4 GHz and 5 GHz.
by Nikotine
Mon Oct 11, 2021 2:37 pm
Forum: IP Cameras
Topic: AD410 doorbell: MAC address changes and password no longer works
Replies: 13
Views: 5623

Re: AD410 doorbell: MAC address changes and password no longer works

You mean someone is trying to hack into the device and upload different firmware??
by Nikotine
Mon Oct 11, 2021 8:40 am
Forum: IP Cameras
Topic: AD410 doorbell: MAC address changes and password no longer works
Replies: 13
Views: 5623

AD410 doorbell: MAC address changes and password no longer works

This device is driving me crazy. When you setup the doorbell, it uses the MAC address that's shown on the Device Information page. https://i.imgur.com/9HWvJjv.jpg I use that MAC address to assign a fixed IP to the device. But after a while, it suddenly starts using another MAC address, even though t...