Amcrest Forum

I'll have to give that a test, thanks for the information!
I have another question. I've noticed that one of the cameras keeps doing the "alarm" on the recording. The camera blacks out, then comes back on after a few seconds. Is this something of concern?

I took my old camera system down and the cameras had a 12v 2.5a power supply for each camera. I already had four of the cameras working fine, but when I plugged in the one camera which had gone bad on me (this is the one when I used the aluminum cable), the camera didn't automatically pop up. I then...

Can you recommend any cameras which will match my NVR? I want to max the system out now that I have it working. Also, with the 850EB, is that one I can have the app on my phone and also on the NVR? When you used the 850EB, was there any thing special you used them for/how did you set them up (ie: lo...

A good night sleep helped. When I got up I realized that the scene mode had been modified. I changed it to auto and the green disappeared.

Ok have to ask what model of NVR is it? So I ask because the camera is 5mp even though it is said to be 4mp it really is 5. The DVR/NVR has to support the 5mp format that the camera is or the camera will have to be down encoded to a lower Resolution.. Also did you click the pencil and change the pa...

The 850Eb I own 2 of them so have no need for CHIP info. My issue is a different camera that was bad that has chips that I am going to guess are fakes or ones they stole from TI or someone and put their own Markings on.. The 850EB if I remember right is built very well with good known chips in them...

Yes the Doorbell is a Smart home product and is required to be setup before it will work on your DVR/NVR.. Even with a IP setup static in the Router. Once you setup the camera in the Smart Home app you should be able to access the camera as normal. Smart Home App is Required. I have it on the app. ...

So about the Plugin. That NVR works with IE. so in order to use that NVR on a WebUI you would need to use the Edge browser and then setup to use IE Mode. There is now a button where you can just click and add where it used to be you would have to go into the settings to setup the Ip to work with th...

I rebooted the AD110 and now the NVR is telling me "192.168.1.23 - Can not find network host" So I guess the password worked, so now it must be an IP issue. I looked online, but the Amcrest website explained to add the doorbell to the app, then add it to the DVR. It explained that the NVR ...

Another thing to add, is that the DVR is using the 10.1.1.x subnet, while my router is using 192.168.1.x
The AD110 has a 192.168.1.x IP. I don't know if that is part of the problem.