Amcrest Forum

nice writeup, thanks.
im using a Rogy BT16 transformer that has 8-24 vac, were im using the 24v setting. if i have time im going to try to do some testing and get back with reults.

thanks for the explanation, but qouting your statement above "You don't understand.. The CHIME KIT is needed 100% without or with a Doorbell..." well i have had the device hooked up without chime and chime-kit for 8-9 months and its been working fine but i was missing my indoor chime. it c...

a small update, it works fine without the chime kit and connecting it to 0f and 1 on the existing chime works but also then chimes every ten seconds. i have a feeling that the wiring is old and really thin cables mybe replaceing them might help.
Erik

so understanding this right, connect kit to 0F and 1?

Hi, i have the AD110 doorbell connected and working but i had some problems with the chime kit so i have it running without my internal doorbell. 1. do i need the chime-kit with internal doorbell? 2 . i have this wiring, attached pic the one to the right! were would i connect the chime kit? thanks E...

trying to get my existing doorbell to work. this is how it looks today before i connect the amcrest doorbell camera.
any suggestions would be nice.

@Ekke, be sure not to use the amcrest ip config tool with any smart home cameras. only use the smart home app with smart home cameras for now. good to hear you're getting a replacement. @dhudik, live view works fine even when the doorbell is added to an amcrest nvr. be sure NOT to make any doorbell...

@Ekke, yeah the amcrest ip config tool can be fatal to the ad110 doorbell hence stick with the smart home app for now. you can raise a ticket via, https://amcrest.com/smarthomesupport and you would need a rma when the factory reset button no longer works. Hey, jsut a small update! i managed to get ...

working on it now, will be back and let you all know the outcome

@Revo2Maxx thanks for the info, so any suggestions regading contacting amcrest?
do i dare to say that i change some silly thing with the config tool or just tell the its broken!