Amcrest Forum

it might be sorry to say an issue with your Router to Camera distance.. At this point, there's no question that the AD110 has hardware issues, wireless distance is usually NOT the problem. I would stop blaming people's routers. The doorbell is built inadequately and sucks too much power for the IR ...

GaryOkie wrote: ↑Thu Aug 20, 2020 6:26 pm You can give this code a try (I am away from home now and have not tested it)...

Wow cool! Thank you for your help, I will give this a try and report back if it works.
It's great to interact with smart people such as yourself that know how to create workarounds to issues

Can someone help possibly what am I doing wrong below When I go to URL http://10.0.2.70/cgi-bin/configManager.cgi?action=setConfig&Lighting[0][0].Mode=Off , it says "OK" and then turns off night mode, yay! I am trying to execute this command in YAML with home-assistant as scheduled tas...

If I can accomplish the above 2 things via API calls, then I'll setup a cron job on one of my Raspberry Pi's and call it a day. same problem here, motion detection gone haywire and I am prevented from disabling night vision @GaryOkie thanks very much for your help i will see if i can set up cron jo...

The issue is at night when the night vision is set to Auto, "successfully connected to network" The issue does not exist when Night vision is set to Off The camera for some reason is re-enabling night mode after a couple of weeks, and then I am required to go back into the app and turn Nig...

My doorbell has the "successfully connected to network" problem I had already upgraded my transformer, 16V, 30VA ( amazon .com/gp/product/B07HKQ4GC3 ) Setting Nite Vision to "Off" with the phone app lasts for awhile, but reverted to Auto by itself I wish there was a way to get ri...

There is a new firmware available for AD110 through the android app that allows setting
Night Vision Off >

1.000.00AC004.0.R.200509
Can you try it out and let me know if it fixes?

You can do this with NDI studio monitor and VLC player tapping into the RTSP stream of the IPcam This guide is very helpful https://www.mgraves.org/2018/09/how-to-using-an-rtsp-stream-as-a-source-for-a-webrtc-application/ The NDI software download link is here http://new.tk/NDITools Install the driv...

I have exact same issue after upgrading the power supply, and have followed OP exact same steps :roll: My doorbell transformer is this 16v 30va https://www.amazon.com/gp/product/B07HKQ4GC3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The issue may stem from multiple sources accessing RTSP str...

the ad110 doorbell does not have a web ui. please consider using only the smart home app with the doorbell configuration because of the high risk the factory reset button may not work if one bricks the doorbell. how i have approached this was to reassign one of my amcrest ip cameras with a differen...