Search found 3376 matches

by Revo2Maxx
Sat Nov 27, 2021 8:41 pm
Forum: NVRs / DVRs
Topic: Need Expert help on new router
Replies: 4
Views: 20

Re: Need Expert help on new router

Sorry I don't have your T Mobile setup. I don't know what it offers but if it has a Lan Port to be honest this is what I would do... Use a Second router like a Netgear Nighthawk, or some other normal router that you would connect to a Cable Modem lets say.. Connect your T-Mobile lan port from that d...
by Revo2Maxx
Sat Nov 27, 2021 2:06 pm
Forum: IP Cameras
Topic: IP2M-841B
Replies: 3
Views: 22

Re: IP2M-841B

Hello and Welcome to the forum I personally have never heard of the AV being out of sync? I mean on a NVR I have heard camera not sync with other cameras in the timeline. If your having that type of issue I would look at what ever program your trying to run it with and find out what the issues are. ...
by Revo2Maxx
Sat Nov 27, 2021 1:20 pm
Forum: NVRs / DVRs
Topic: Need Expert help on new router
Replies: 4
Views: 20

Re: Need Expert help on new router

Personally I don't know Maybe something to try, keep your NVR on however you have it connected to your new service and reboot your T mobile system and see if it gives it permission for internet access. It might be something that you have to do within the setup of the device. Maybe the NVR is setup f...
by Revo2Maxx
Sat Nov 27, 2021 11:56 am
Forum: NVRs / DVRs
Topic: Need Expert help on new router
Replies: 4
Views: 20

Re: Need Expert help on new router

Well personally I think that sounds like some questions to put to T Mobile. I am not sure how their product works. One of the issues and might have only been how long ago the device was on market. However it was setup only to work with connected devices to give access to the internet. They didn't wo...
by Revo2Maxx
Fri Nov 26, 2021 11:52 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 33

Re: NV4108-HS Motion Detection Schedule

There might be a limit of how many you can access at a Time I personally don't know because I have always limited my self to 2 windows outside of my NVR window using this method. So my guess is that it has to be a limit setup within the NVR. So if you want to mess with one camera or 2 because they h...
by Revo2Maxx
Fri Nov 26, 2021 8:45 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 33

Re: NV4108-HS Motion Detection Schedule

Yes that is however the issue is that you need to adjust for Event that is General. The General would be full time snaps.. Where it says General click that and changed to event Then yes you will need to enable the Snap on events. Then in the NVR you will also need to do it again for each channel you...
by Revo2Maxx
Fri Nov 26, 2021 7:07 pm
Forum: IP Cameras
Topic: Playback drops upon motion detection
Replies: 4
Views: 23

Re: Playback drops upon motion detection

Well this might be Problematic in 2 ways.. However lets first start with Pre-Record, Right click then choose Main Menu (Log in if you have to) then on the bottom of the screen Click on Storage, Then on the left of screen click on Schedule, then at the top make sure it is on REC as it should be if yo...
by Revo2Maxx
Thu Nov 25, 2021 11:12 pm
Forum: NVRs / DVRs
Topic: NV4108E-HS HDMI output issue
Replies: 1
Views: 5

Re: NV4108E-HS HDMI output issue

I am not sure there is a lot there and it is hard to say why.. No since that 2 would cause issues that are designed to work with the NV4108e_HS NVR over non Amcrest cameras that are working without issue. How are things added to the NVR? Did you add them Manual input or Auto from the NVR menus? Skip...
by Revo2Maxx
Thu Nov 25, 2021 10:15 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 33

Re: NV4108-HS Motion Detection Schedule

Ok couple of things when it comes to Snapshots... First you will need to make sure your camera has Snap shots turned on even if no mSD card is installed it will need to be turned on.. Second you will want to go to your NVR, Storage, Schedule, Snapshot and setup in there for motion and personally I w...
by Revo2Maxx
Thu Nov 25, 2021 9:56 pm
Forum: IP Cameras
Topic: NV5232e-16p unusable with IP4M-1051w
Replies: 21
Views: 412

Re: NV5232e-16p unusable with IP4M-1051w

Yeah I don't know really. It is hard to say. Personally I don't know what chip is in the 5232E-16p I am going to guess that it has to be better then my AI NVR that only has a Dual Core CPU running at 1.5 GHz. I mean to tell the truth the 4116E-8p -HS and my 2116-HS both have Quad Core Cpus one is ru...