Search found 3394 matches

by Revo2Maxx
Thu Dec 02, 2021 5:02 pm
Forum: IP Cameras
Topic: Live view on IPhone not working
Replies: 3
Views: 516

Re: Live view on IPhone not working

Archie2014 Welcome to the Forum remove the connection of the device you have setup and want remote access too, Then setup the camera again this time using P2P option rather then the IP method of access. Setting up with P2P your Live View should work with your Phone in Wifi at home and while off you...
by Revo2Maxx
Thu Dec 02, 2021 1:42 pm
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 15
Views: 652

Re: NVR NV4108 Interference from other REMOTES

Well as I said it is good to have them when they work.. I have a 16ch NVR that has a Button and after changing out my Phone that had my Password in it and not changing the password to my normal one and even leaving my email to an old email that I didn't have access to I almost felt like I had lost t...
by Revo2Maxx
Thu Dec 02, 2021 1:22 pm
Forum: Amcrest View Pro
Topic: Set up with Serial Number option
Replies: 1
Views: 8

Re: Set up with Serial Number option

Sorry not sure I understand what you mean. But I will try to answer the question to what I think your asking about.. P2P or Port Opening and Forwarding.. Using the Cameras SN to setup in your App this is giving the camera a way to Punch a hole in your network and contact a World order of Servers set...
by Revo2Maxx
Thu Dec 02, 2021 5:17 am
Forum: IP Cameras
Topic: Firmware Upgrade for IP2M-842: Any ETA ?
Replies: 4
Views: 310

Re: Firmware Upgrade for IP2M-842: Any ETA ?

The 841 and the 842 are 2 different types of cameras and the FW from the 841 wouldn't work in the 842.. The 842 was discontinued before the release of the 2019 or 2020 FW sets. Trust me I wish I had some Updated software for some Higher end cameras like my 846eb, my 850eb. But I work with what I hav...
by Revo2Maxx
Wed Dec 01, 2021 7:52 pm
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 15
Views: 652

Re: NVR NV4108 Interference from other REMOTES

Well it might be that your IR of your remote is close enough to the IR of the DVR and when you do something on the Remote it changes the Channel of the DVR. I know that there are on normal CCTV Remote an ability to change between the channels. That is my Guess..
by Revo2Maxx
Wed Dec 01, 2021 2:25 pm
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 15
Views: 652

Re: NVR NV4108 Interference from other REMOTES

Well I can tell you that it is nice to have a Reset button when they work. Yes if the reset was to take place by pressing the Reset button you will 1 hear a Beep right after turning on, Then when it starts up it will be just like it was when the NVR was bought NEW... I have a good FEW NVR's and DVR'...
by Revo2Maxx
Wed Dec 01, 2021 12:00 pm
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 15
Views: 652

Re: NVR NV4108 Interference from other REMOTES

Yes it can be a Pain to get these to reset off the button. In truth the system Reset in side is to protect the Owner. So if your able to log into the Device I would start with a Software Reset. With your system on, Right click screen and then Main Menu, Then click on System, Then on the left bar cli...
by Revo2Maxx
Wed Dec 01, 2021 10:57 am
Forum: IP Cameras
Topic: NVR NV4108 Interference from other REMOTES
Replies: 15
Views: 652

Re: NVR NV4108 Interference from other REMOTES

Itcacman Hello and Welcome to the Forum I would look over your DVR setup and see if you have them setup for Tour if you do it will cycle though the channels in use or not if it wasn't setup right. Also best to look at the top of the DVR for a circle looking thing. It can have a Lock on it or withou...
by Revo2Maxx
Wed Dec 01, 2021 12:45 am
Forum: Amcrest View Pro
Topic: AVP no pictures displayed during push notification
Replies: 2
Views: 26

Re: AVP no pictures displayed during push notification

Another thing to try. For testing anyway. Go to playback, then pick the image at the top right, then when the Device list comes up you need to look close because only the last Min will be displayed you will want to set a time you think there was some images, (You will have to pick a day before it wi...
by Revo2Maxx
Wed Dec 01, 2021 12:33 am
Forum: Amcrest View Pro
Topic: AVP no pictures displayed during push notification
Replies: 2
Views: 26

Re: AVP no pictures displayed during push notification

A couple of things can happen. So asking for a Jpg without having them turned on could cause this (Give you a time line but no image) However you said you can click on ASP and Bring up the info from your cameras, This has me wondering if the NVR has it enabled as said above or that your camera isn't...