Search found 3372 matches

by Revo2Maxx
Fri Nov 26, 2021 11:52 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 31

Re: NV4108-HS Motion Detection Schedule

There might be a limit of how many you can access at a Time I personally don't know because I have always limited my self to 2 windows outside of my NVR window using this method. So my guess is that it has to be a limit setup within the NVR. So if you want to mess with one camera or 2 because they h...
by Revo2Maxx
Fri Nov 26, 2021 8:45 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 31

Re: NV4108-HS Motion Detection Schedule

Yes that is however the issue is that you need to adjust for Event that is General. The General would be full time snaps.. Where it says General click that and changed to event Then yes you will need to enable the Snap on events. Then in the NVR you will also need to do it again for each channel you...
by Revo2Maxx
Fri Nov 26, 2021 7:07 pm
Forum: IP Cameras
Topic: Playback drops upon motion detection
Replies: 4
Views: 19

Re: Playback drops upon motion detection

Well this might be Problematic in 2 ways.. However lets first start with Pre-Record, Right click then choose Main Menu (Log in if you have to) then on the bottom of the screen Click on Storage, Then on the left of screen click on Schedule, then at the top make sure it is on REC as it should be if yo...
by Revo2Maxx
Thu Nov 25, 2021 11:12 pm
Forum: NVRs / DVRs
Topic: NV4108E-HS HDMI output issue
Replies: 1
Views: 5

Re: NV4108E-HS HDMI output issue

I am not sure there is a lot there and it is hard to say why.. No since that 2 would cause issues that are designed to work with the NV4108e_HS NVR over non Amcrest cameras that are working without issue. How are things added to the NVR? Did you add them Manual input or Auto from the NVR menus? Skip...
by Revo2Maxx
Thu Nov 25, 2021 10:15 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 31

Re: NV4108-HS Motion Detection Schedule

Ok couple of things when it comes to Snapshots... First you will need to make sure your camera has Snap shots turned on even if no mSD card is installed it will need to be turned on.. Second you will want to go to your NVR, Storage, Schedule, Snapshot and setup in there for motion and personally I w...
by Revo2Maxx
Thu Nov 25, 2021 9:56 pm
Forum: IP Cameras
Topic: NV5232e-16p unusable with IP4M-1051w
Replies: 21
Views: 315

Re: NV5232e-16p unusable with IP4M-1051w

Yeah I don't know really. It is hard to say. Personally I don't know what chip is in the 5232E-16p I am going to guess that it has to be better then my AI NVR that only has a Dual Core CPU running at 1.5 GHz. I mean to tell the truth the 4116E-8p -HS and my 2116-HS both have Quad Core Cpus one is ru...
by Revo2Maxx
Thu Nov 25, 2021 8:46 pm
Forum: IP Cameras
Topic: IP cameras run in Dark spaced 24/7
Replies: 1
Views: 15

IP cameras run in Dark spaced 24/7

Hello all sorry for the dumb question but at times things happen lol.. So I have a Camera that I have in dark spaces, This space are always dark unless there is active person in area. I normally have a IR Blaster working however after 11 years now of use I would say on average 8300 hours per year. T...
by Revo2Maxx
Thu Nov 25, 2021 8:14 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 31

Re: NV4108-HS Motion Detection Schedule

Nice to clear that UP I was just about to reply to something that was just kind of talking points of what I already said.. Then sadly no that isn't how it would work. If you setup turning off in the Motion Detection even though you are asking for MD to record it wouldn't record even if setup if you ...
by Revo2Maxx
Thu Nov 25, 2021 7:23 pm
Forum: NVRs / DVRs
Topic: NV4108-HS Motion Detection Schedule
Replies: 11
Views: 31

Re: NV4108-HS Motion Detection Schedule

No in that Schedule it says when you want the system to work with Motion events So above you have in Record Schedule that you want full time 24/7 and motion from 6 to 6. In theory you could change the Motion Detect area to work in 6 to 6 and have motion Record full time and you would still get 6-6 r...
by Revo2Maxx
Thu Nov 25, 2021 6:45 pm
Forum: Amcrest Surveillance Pro
Topic: Why cant I go to a specific point in a recording?
Replies: 1
Views: 17

Re: Why cant I go to a specific point in a recording?

Hello and Welcome to the forum So Auto log in? I am going to guess your asking about the PC-NVR part of ASP? When you setup the Software package there was if I remember right an area that asked if you wanted it to Auto Load and must have been over looked. That is ok and easy to cure. In the area of ...