Search found 15 matches

by duke69111
Thu Sep 26, 2019 10:28 pm
Forum: IP Cameras
Topic: P2P Status Offline
Replies: 1
Views: 1612

Re: P2P Status Offline

I factory reset my cameras that were p2p offline and then set them back up using my laptop. They p2p is now online and working.
by duke69111
Thu Sep 26, 2019 10:25 pm
Forum: IP Cameras
Topic: p2p offline, not working on android devices
Replies: 2
Views: 15170

Re: p2p offline, not working on android devices

I had this problem on three of my four cameras. I factory reset my three cameras that were offline and then set them back up using my laptop. They p2p is now online and working.
by duke69111
Fri Jul 26, 2019 2:05 pm
Forum: IP Cameras
Topic: How to get stable bit rate
Replies: 5
Views: 2008

Re: How to get stable bit rate

@duke69111 the only difference I can see is in the bit rate setting for the extra stream but that apart, would it be possible to exchange the two camera positions to see if the higher bandwidth useage follows the camera. Are they on separate LANs ? If so then an exchange would also be a good pointe...
by duke69111
Fri Jul 26, 2019 11:34 am
Forum: IP Cameras
Topic: How to get stable bit rate
Replies: 5
Views: 2008

Re: How to get stable bit rate

I'm having the same problem. I installed two of the exact same systems at two seperate houses next door to each other. There were both purchased at the same time and installed about 4 months apart. The cameras in both systems are (IP8M-2496EB) and are connected through the amcrest 8 port poe switch....
by duke69111
Mon Jul 08, 2019 10:29 pm
Forum: Amcrest View Pro
Topic: Windows 7 Install Issue
Replies: 1
Views: 595

Re: Windows 7 Install Issue

After tabling and entering through the install and thinking, I found the solution. Go to the windows 7 screen resolution. Click Make Text and other items larger or smaller. 0708192317.jpg Change the scaling to 100% default from 125%. 0708192317a.jpg 0708192317b.jpg Then click apply and log off and t...
by duke69111
Mon Jul 08, 2019 10:25 pm
Forum: IP Cameras
Topic: Amcrest Surveillance Pro Setup V1.14.1.R.20161018
Replies: 8
Views: 2471

Re: Amcrest Surveillance Pro Setup V1.14.1.R.20161018

I know this is an old post, but jack7 had the solution. Here's some screenshots to help. Go to the windows 7 screen resolution. Click Make Text and other items larger or smaller. 0708192317.jpg Change the scaling to 100% default from 125%. 0708192317a.jpg 0708192317b.jpg Then click log off and try a...
by duke69111
Mon Jul 08, 2019 5:37 pm
Forum: Amcrest View Pro
Topic: Windows 7 Install Issue
Replies: 1
Views: 595

Windows 7 Install Issue

Hello, I successfully installed Amcrest View Pro software on my Windows 10 pc over the weekend. I'm trying to install it on my windows 7 pc today and I'm getting the screen below upon opening the .exe install file. There is nowhere to maximize the screen or click next to install. How do I get past t...
by duke69111
Fri Jul 05, 2019 11:24 am
Forum: IP Cameras
Topic: Cant connect iPhone to cameras
Replies: 11
Views: 3261

Re: Cant connect iPhone to cameras

We have seen an increase in P2P issues and from my understanding the engineering team has found the issue while I was off and they just told me the issue should be resolved. Please try the P2P method again. If you are still having issues please let me know so I can alert the team. Hope all is well!...
by duke69111
Wed Jul 03, 2019 12:02 pm
Forum: IP Cameras
Topic: Cant connect iPhone to cameras
Replies: 11
Views: 3261

Re: Cant connect iPhone to cameras

We have seen an increase in P2P issues and from my understanding the engineering team has found the issue while I was off and they just told me the issue should be resolved. Please try the P2P method again. If you are still having issues please let me know so I can alert the team. Hope all is well!...
by duke69111
Mon Jul 01, 2019 10:53 am
Forum: Amcrest View Pro
Topic: Iphone Notifications
Replies: 6
Views: 1155

Re: Iphone Notifications

I experienced that as well when I first set mine up. I have four cameras setup through the Amcrest poe switch and four plugged directly into the NVR. I was getting video on the four from the NVR, but not the four through the switch. When you get a notification and it says no recording available, the...