Hello,
I have an amcrest ad410 door bell.
I am usable to connect to home assistant.
The amcrest smart home is installed on my android phone and work as expected.
In home assistant I enter admin as user is that right?
I enter the password that I wrote in android app.
The firmware version is: ... 7t210220. Where can I find the latest? How can I install it?
Best regards
Thierry Vorms
AD410 Not able to connect to home assistant
Re: AD410 Not able to connect to home assistant
Hello and welcome to the Forum.
My guess is the FW is Current however I will post a FW page that does have some Smart Home products on. My AD410 is said to be current and as per picture looks like yours I am guessing.. https://amcrest.com/firmware
My guess is the FW is Current however I will post a FW page that does have some Smart Home products on. My AD410 is said to be current and as per picture looks like yours I am guessing.. https://amcrest.com/firmware
Be Safe.
-
- Posts: 6
- Joined: Thu Jun 30, 2022 10:40 am
Re: AD410 Not able to connect to home assistant
You can try the following snippet on your configuration.yaml
And the following triggers on automations to:
1. Door bell button press:
2. Person appears
*Replace "Bell" with your doorbell name.
Code: Select all
amcrest:
- host: ip-or-host-name
username: admin
password: !secret amcrest
name: Bell
resolution: high
stream_source: rtsp
scan_interval: 15
binary_sensors:
- online
- crossline_detected
- motion_detected
- audio_detected
switches:
- privacy_mode
sensors:
- sdcard
1. Door bell button press:
Code: Select all
trigger:
- platform: event
event_type: amcrest
event_data:
event: CallNoAnswered
camera: Bell
payload:
action: Start
Code: Select all
trigger:
- platform: event
event_type: amcrest
event_data:
event: SmartMotionHuman
camera: Bell
- platform: event
event_type: amcrest
event_data:
event: SmartMotionVehicle
camera: Bell
- platform: event
event_type: amcrest
event_data:
event: CrossRegionDetection
camera: Bell
payload:
action: Start
data:
Object:
ObjectType: Human
Re: AD410 Not able to connect to home assistant
not sure if replying to a several month old post is going to reach the OP - but...
for the sake of clarity regarding the AD410 OP question- only the CrossRegionDetection event is relevant for Human Detection. The SMD events are not possible on the AD410. The button press is described succinctly.
Thanks.
for the sake of clarity regarding the AD410 OP question- only the CrossRegionDetection event is relevant for Human Detection. The SMD events are not possible on the AD410. The button press is described succinctly.
Thanks.