I would like to use my software VisionGS to grab stills from one channel on my sec dvr.
Right now i use hardware capture device and an analog srandard def camera.
shown here on my lake cam site.
http://www.greatlakesvista.com/
I was hoping to use one of my security cams on the lake and up load a 720p images that would be sheduled and managed by VisionGS.
VisionGS supports both hardware capture devices and ip cameras, when setting up ip cams i can enter the ip, port and channel.
there are some built in selection for older models of cameras and dvrs. i did get this software to work with a dlink ip cam.
Is there a back end standard for the this type of setup? so far none of the other dvr options are working.
rtsp seems to be the only option as i have that working with andriod software.
if there is any chance what port wold i need to enter,
TCP
UDP
HTTP
HTTPS
RTSP
Thanks
use other ip camera software with dvr?
Re: use other ip camera software with dvr?
Hello,
I went ahead and downloaded Vision GS to see if I could add this myself. Unfortunately I was not able to get it to work either. I don't see why it wouldn't work though. I have sent a request to the developer to add support for our systems as well as if there is a way to set it up. I will update you as soon as I get it working.
I do know that Blue Iris works with our DVR as we are running the cameras on our live demo page with this.
I went ahead and downloaded Vision GS to see if I could add this myself. Unfortunately I was not able to get it to work either. I don't see why it wouldn't work though. I have sent a request to the developer to add support for our systems as well as if there is a way to set it up. I will update you as soon as I get it working.
I do know that Blue Iris works with our DVR as we are running the cameras on our live demo page with this.
-
- Posts: 1
- Joined: Fri Jul 31, 2015 7:54 pm
Re: use other ip camera software with dvr?
Zach - how did you learn to use blue iris with it? I am trying to do the very same...
Re: use other ip camera software with dvr?
I have attached a picture to illustrate the fields that need to be changed.
- 1. IP of the DVR (Best if the DVR has a static IP address)
2. HTTP Port you set (Default is 80)
3. RTSP Port (This will likely be the default 554)
4. Username and Password to login to the DVR
5. Select the Make/model as the same one shown in the picture (This is for a generic RTSP device)
6. For Path put in /cam/realmonitor?channel=#&subtype=% (# is what channel you want to view and % is main stream 0, or sub stream 1)
Re: use other ip camera software with dvr?
/cam/realmonitor?channel=1&subtype=0
This was the missing item that got it working for me-
This was the missing item that got it working for me-
Re: use other ip camera software with dvr?
This saved me much troubles.wingerr wrote:/cam/realmonitor?channel=1&subtype=0
This was the missing item that got it working for me-
Re: use other ip camera software with dvr?
wingerr wrote:/cam/realmonitor?channel=1&subtype=0
This was the missing item that got it working for me-
Where was this entered visiongs?