Slow palyback and no pause

Have some questions or having issues with your DVR/NVR(s), Post them here for the mods and other users to assist you with.
Post Reply
mt100
Posts: 5
Joined: Sat Jan 23, 2021 8:36 pm

Slow palyback and no pause

Post by mt100 »

I have the NV4108 and have two cameras recording to it. When I watch the playback it is half the speed of normal and the pause button doesn't pause the video so I can get a screen capture. This is while in the web interface.

How can I speed up the playback?

How can I pause the video or get a screenshot of the video?
User avatar
Revo2Maxx
Site Admin
Posts: 5820
Joined: Sat Jun 15, 2019 3:05 pm

Re: Slow palyback and no pause

Post by Revo2Maxx »

So I know we are talking about the Same Device I would like you to confirm that your WebUI looks like this.

I say this because while you mention NV4108 there are many different ones. While the one pictured is really a 4108E however it does have the same WebUI as my 4108 and is one I have access to right now. My 4108 is in a Remote location and still a few hours before my Internet access at that location is active because of my connection not being very secure I only open my network access for a couple of hours so I can make a connection and check out my recordings..

Anyway if your system is a different one then the normal 4108 then it might look like my second Picture and at that case would/could be a different issue all together. So if there is any other thing after the 4108 that would be good to know, It might be 4108, 4108h, 4108E, 4108E-HS, 4108-HS, 4108E-A2 or even 4108-A2
4108E is the same as 4108h and is the older NVR that is no longer supported with FW last one was around 2018
Screenshot (2737).png
Screenshot (2737).png (238.03 KiB) Viewed 825 times
This is of a 41xxE-HS and is the same as 4108-HS, 4108E-HS, 4116E-HS, 4116-HS, and others with the 4.0NVR Firmware..
Screenshot (2738).png
Screenshot (2738).png (160.76 KiB) Viewed 825 times
Here to help the best I can.
Be Safe
Post Reply