I have a properly operating NVR4108 IP setup that I can access via IOS Phone and Amcrest View Pro app from anywhere. So, that means that I have the P2P function of the NVR enabled. I am also able to access any camera individually via P2P. However, when I attempt to Login the NVR remotely from the web using a Windows machine and MS IE-11 browser on the "P2P Web-Gateway" and the "Device" tab and AMR number inserted along with "admin" and password it reports back "Invalid S/N, be sure to enable P2P in your device." I am also able to view all cameras individually using the "P2P Web-Gateway" browser function but not via the NVR. What am I doing wrong?
I would like to have the NVR accessible via the browser in order to view past recordings that it appears the IOS app will not do. While viewing the cameras individually I can access their SD card motion sensing recordings but need the continuous record access of the NVR to roll-back in time.
NVR4108 P2P Amcrest View
Re: NVR4108 P2P Amcrest View
If you can't get P2P amcrestview.com to work with NVR, you could try DDNS and port forwarding with Amcrest Web UI or Surveillance Pro. Amcrest Surveillance Pro also supports P2P.
https://support.amcrest.com/hc/en-us/ar ... our-Device
https://support.amcrest.com/hc/en-us/ar ... our-Device