NVR NOT DISPLAYING CAMERAS ON DISK MANAGMENT

[LJNC]

The problem is that I am not displaying any of the cameras?
I can't figure out why they are not displaying either under default group or Home group.
All my cameras are online and GREEN, same as NVR. I also have successfully allocated space to the NVR

[Revo2Maxx]

Hello and Welcome to the forum..

I can't see the Pictures in your PDF. maybe resizing the image for upload to the thread might be little more helpful if they are over sized..

So new more info about your setup!

NVR Model or Brand
and cameras Models and or Brand

So something to check seeing I don't know what the issue right now is.. IN your NVR if you have under the Display Tab, On Display, There might be Screen Enable Make sure that has a Check mark..

Outside of that Only guess I have until I have more info

[LJNC]

Hi
Thank you for the reply. I am reaching the pictures, as JPG's.

[LJNC]

here are two more pics

[longedge]

In PC-NVR Device Management, select the Home Group and then the cameras in the group should appear. Select them one at a time and then click on the double blue right arrow to transfer them into the selected channel display area. That should do the trick.

[Revo2Maxx]

Looking at how things are setup in my system it seems the issue is your systems are all P2P and no recordings of P2P devices out side of Network

So it looks like a few things might need to change but first I would try changing 1 camera first.

Change from P2P setup to an IP setup. Then if that is able to be added to your PC NVR all is good. However another issue might be that your PC-NVR is setup in Local and not in your Computers IP network and as such might not work.

So in the end you might need to not only change all your Cameras from P2P connection to IP you also might need to change your PC-NVR setup from being connected under name Local that is running on a 127.0.0.1 IP and not the true ip of your Computer...

I know for sure that I can't record my P2P connected devices on PC-NVR only ones that come up for the ability to be added is once that are on my Network IP range..

I just took my NVR 4216E-AI NVR and Removed it from my ASP, added it back with P2P setup and while I can access the Cameras of the NVR looking at the live feed, PC-NVR will not let me add the NVR and it don't load in the list of cameras or devices I can add anymore like it did before being removed...

[LJNC]

Thank you. That's exactly what it was. I changed all the cameras to IP and now I can see them on the NVR
Thank you for your help.

[Revo2Maxx]

Welcome glad to hear you were able to get things going..

[Ollie]

Hi, since i have the same issue as described, i wonder whether the devices' ip-s should be local ones only?
I mean my cameras are remote and on a different network (than my pc-nvr). Would i still be able to see them in the pc-nvr after re-adding them to the smart-pss using their ip-s (instead of p2p)?

[Revo2Maxx]

@Ollie Hello and Welcome to the Forum

So if you have access to the camera from a remote location and have that IP in your normal network setup then my guess is that it should be able to have a recording setup set.

Take a case with one of my cameras that I have a connection to, It is in a remote location that I can access using a 192.168.0.xxx IP. I have that setup to record on my ASP PC-NVR even though it is setup using 10.0.0.xxx IP computer. That computer does have a good few IP ranges setup in the networking area.

I do remember that the older ASP didn't like to work with a computer that has multi IP setup. So if your using the OLD ASP then don't think having a different camera IP would work on PC-NVR..