All cameras disappear from the NVR
All cameras disappear from the NVR
It started with just 1 camera disappearing - now all 4 are gone. I have an 8port POE Amcrest NVR - Since I had 1 device that wasn't working - I powered off my NVR then, restarted it. Now they are ALL gone. Any thoughts?
Re: All cameras disappear from the NVR
Hello and Welcome to the forum
IP address of the NVR and Cameras are not in the same Range?
So going to need some Info about your Hardware? NVR Type? Camera Type?
Next issue that it could be is that your Password you setup for the Cameras are different then what the NVR is looking for (All Gone?) do you mean they are not showing on Grid View or No longer on your NVR to configure?
IP address of the NVR and Cameras are not in the same Range?
So going to need some Info about your Hardware? NVR Type? Camera Type?
Next issue that it could be is that your Password you setup for the Cameras are different then what the NVR is looking for (All Gone?) do you mean they are not showing on Grid View or No longer on your NVR to configure?
Be Safe.
Re: All cameras disappear from the NVR
I came across this issue too; onvif cameras will not auto-add after a NVR reboot.
Make sure the "multicast & broadcast" under the security or system tab is enabled on all the cameras; otherwise they won't auto-add.
Could be something else too as mod mentioned above, but this just came across my mind
Make sure the "multicast & broadcast" under the security or system tab is enabled on all the cameras; otherwise they won't auto-add.
Could be something else too as mod mentioned above, but this just came across my mind