Wall mount issues

Have some questions or having issues with your IP Camera(s), Post them here for the mods and other users to assist you with.
Post Reply
drhans
Posts: 1
Joined: Mon Nov 29, 2021 3:57 pm

Wall mount issues

Post by drhans »

I've got a IP8M-MT2544EW camera and the corresponding AMCPFB203W wall mount. When the camera is mounted to wall mount, is there supposed to be a large exposed slot where the camera flange extends past the edge of the wall mount? Seems like this would be an ingress point for water and spiders.
Attachments
IMG_7271.jpg
IMG_7271.jpg (970.16 KiB) Viewed 413 times
IMG_7270.jpg
IMG_7270.jpg (1.04 MiB) Viewed 413 times
User avatar
Revo2Maxx
Site Admin
Posts: 5820
Joined: Sat Jun 15, 2019 3:05 pm

Re: Wall mount issues

Post by Revo2Maxx »

Hello and Welcome to the forum

I am not sure where you got the Mount from was it Amcrest or a 3rd party? From what I read in the Manual for the camera the outside is 122mm and from what I can find the mount is to house a 122mm camera and so in theory that camera should be right to the edge.. Maybe that camera you have is from a Different Generation and has a bigger housing then what it was first released with some 2 years ago or so.. Might have been the part was mis labeled if it was from Amcrest..
Here to help the best I can.
Be Safe
Post Reply