Wall mount issues

Have some questions or having issues with your IP Camera(s), Post them here for the mods and other users to assist you with.
Post Reply
drhans
Posts: 1
Joined: Mon Nov 29, 2021 3:57 pm

Wall mount issues

Post by drhans »

I've got a IP8M-MT2544EW camera and the corresponding AMCPFB203W wall mount. When the camera is mounted to wall mount, is there supposed to be a large exposed slot where the camera flange extends past the edge of the wall mount? Seems like this would be an ingress point for water and spiders.
Attachments
IMG_7271.jpg
IMG_7271.jpg (970.16 KiB) Viewed 211 times
IMG_7270.jpg
IMG_7270.jpg (1.04 MiB) Viewed 211 times
User avatar
Revo2Maxx
Site Admin
Posts: 3549
Joined: Sat Jun 15, 2019 3:05 pm

Re: Wall mount issues

Post by Revo2Maxx »

Hello and Welcome to the forum

I am not sure where you got the Mount from was it Amcrest or a 3rd party? From what I read in the Manual for the camera the outside is 122mm and from what I can find the mount is to house a 122mm camera and so in theory that camera should be right to the edge.. Maybe that camera you have is from a Different Generation and has a bigger housing then what it was first released with some 2 years ago or so.. Might have been the part was mis labeled if it was from Amcrest..
Thanks to all that has helped out others on the Forum
GoodLuck
Post Reply