I inserted a 64GB Sandisk micro SD card in my IP3M-943. I went to the Web View app on my laptop and went to setup/storage/destination/path. I made sure that the SD card was chosen for all items and then hit save.
However, when I go to setup/storage/destination/SD Card nothing is listed. Any idea why the micro SD card isn't recognized?
SD Card not in setup list
Re: SD Card not in setup list
Hi hennesseystealth,
Make sure you are using SD card above class6 and try formatting it from computer in FAT32 before inserting it to camera. Properly insert into camera and do manual reboot that should fix it if everything is good.
Make sure you are using SD card above class6 and try formatting it from computer in FAT32 before inserting it to camera. Properly insert into camera and do manual reboot that should fix it if everything is good.
-
hennesseystealth
- Posts: 18
- Joined: Mon Dec 31, 2018 1:38 pm
Re: SD Card not in setup list
My micro SD card is labeled SanDisk Ultra 64GB XC I. The little icon in the lower left is a U with a 1 inside. I did format it on my computer but exFAT and NTSF are the only options. I used exFAT.