RTSP for Main Stream and Sub Stream

Have some questions or having issues with your IP Camera(s), Post them here for the mods and other users to assist you with.
Post Reply
kjgeraci
Posts: 3
Joined: Tue Nov 24, 2020 6:43 pm

RTSP for Main Stream and Sub Stream

Post by kjgeraci »

Can someone tell me how to determine the address for the SubStream and the address for the Main-Stream of my 4k Amcrest Turret (IP8M-T2499EW-28MM) cameras?

I am trying to set up the RTSP address in Blue Iris like this video ...
https://youtu.be/fwoonl5JKgo?t=644

Thanks for the help!
User avatar
Revo2Maxx
Site Admin
Posts: 5820
Joined: Sat Jun 15, 2019 3:05 pm

Re: RTSP for Main Stream and Sub Stream

Post by Revo2Maxx »

Hello and Welcome to the Forum

Maybe this is what your looking for?

rtsp://user:[email protected]:554/cam/realmonitor?channel=1&subtype=1

This would be the Channel 1 and Substream 1 if you want mainstream then you would want 0 however if your camera has Sub Stream 2 then you would want 2 for the second sub stream if you wanted that data over main or sub steam1

Hope this was what your looking for.. Sorry I didn't click your youtube video as I don't promote giving people I don't know Random Youtube views

In my link above just change for your user and pass where listed and change the ip for my stream to reflect your own camera ip address... Good luck
Here to help the best I can.
Be Safe
kjgeraci
Posts: 3
Joined: Tue Nov 24, 2020 6:43 pm

Re: RTSP for Main Stream and Sub Stream

Post by kjgeraci »

Revo2Maxx wrote: Tue Nov 24, 2020 7:07 pm Hello and Welcome to the Forum

Maybe this is what your looking for?

rtsp://user:[email protected]:554/cam/realmonitor?channel=1&subtype=1

This would be the Channel 1 and Substream 1 if you want mainstream then you would want 0 however if your camera has Sub Stream 2 then you would want 2 for the second sub stream if you wanted that data over main or sub steam1
Thanks for your reply, I'll give it a try.

Do you have any experience with Blue Iris? On the configuration screen it has a place for UN/PWD. I am curious if I need to include the "user:password@" part of the line above.
BI Config.png
BI Config.png (122.02 KiB) Viewed 10412 times
User avatar
Revo2Maxx
Site Admin
Posts: 5820
Joined: Sat Jun 15, 2019 3:05 pm

Re: RTSP for Main Stream and Sub Stream

Post by Revo2Maxx »

If your in the listed item then no only if it was to be run without the area for it..
Here to help the best I can.
Be Safe
kjgeraci
Posts: 3
Joined: Tue Nov 24, 2020 6:43 pm

Re: RTSP for Main Stream and Sub Stream

Post by kjgeraci »

Never mind. UN/PWD was not needed in the address proper.

Thanks for the help, that was what I needed!
User avatar
ohmbroo
Posts: 1
Joined: Wed Nov 24, 2021 10:44 am

Re: RTSP for Main Stream and Sub Stream

Post by ohmbroo »

this was very helpful!!!!
Thanks!
Ohmbroo
Post Reply