Motion detection is enabled. The record box is checked (because I want to record video). If you check the record box, then you must enter a record delay value which has a minimum value of 10 seconds. This means that after the recording stops, then the camera will not record again (even if there is another motion detection trigger) for 10 seconds.
Why is there a mandatory 10 second delay? I know I've missed some activity because of this delay.
Record Delay
Re: Record Delay
Can someone at Amcrest address this issue?
-
manhattanbodega
- Posts: 3
- Joined: Sat Mar 24, 2018 3:56 pm
Re: Record Delay
but you can set it to continuously record even with motion detection enabled.