I have searched and had been reading until my eyes were about to bleed
I have 4 of the Amcrest camera and the one I am working with is the IP4M-1051W and trying to get it to hook up to a New Spectrum Mesh router.
The Mesh router will do both 2.4 and 5ghz.
I contacted Spectrum, they sent me an Update router that is a Mesh router that does both 2.4 and 5ghz.
The old spectrum router was only 5ghz
My new Epson printer is only 2.4ghz, same with my Cameras.
I was not able to setup any cameras on the older Spectrum router that was here. (5ghz only)
I bought a new Epson router and found it will only do 2.4ghz
I called Spectrum, they sent out a new modem and Mesh router.
After I got the new Mesh router, the Epson printer was able to hook up to the new router at 2.4ghz just fine.
I tried to get my IP4M camera but trying to install it, it came back with it was not able to find the 2.4ghz.
My question, is there a way, or how do I get the camera to see the 2.4ghz on the Mesh router ?
I was trying to do the install with the AMCREST View Pro app on my IPhone using the latest ISO upgrade.