IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.

Have some questions or having issues with your IP Camera(s), Post them here for the mods and other users to assist you with.
DataMeister
Posts: 7
Joined: Sat Jul 11, 2020 11:00 pm

IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.

Postby DataMeister » Sun Jul 12, 2020 10:05 am

On the IP4M-1051 if you mount the camera on its side and change the flip setting to 90 or 270 degrees the pan tilt controls don't reorient to control the camera in an intuitive manner. It would be nice of the pan/tilt controls would follow along with the flip setting.

The pan/tilt controls do seem to re-orient properly when setting flip to 180 degrees.

jack7
Posts: 528
Joined: Tue May 29, 2018 7:46 pm

Re: IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.

Postby jack7 » Sun Jul 12, 2020 5:10 pm

If you wall mounted the camera on its side, perhaps this could help and you wouldn't need the 90/270 flip.
https://www.amazon.com/Amcrest-Mounting ... B07VMNPKVL

DataMeister
Posts: 7
Joined: Sat Jul 11, 2020 11:00 pm

Re: IP4M-1051 - Pan/Tilt control doesn't follow the 90 or 270 flip setting.

Postby DataMeister » Fri Jul 31, 2020 12:33 am

I have that bracket, but it actually doesn't help because I'm using the horizontal dimension of the camera for extra height.


Return to “IP Cameras”

Who is online

Users browsing this forum: Google [Bot] and 8 guests