IP3M-HX2B Connected but No Live View

Have some questions or having issues with your IP Camera(s), Post them here for the mods and other users to assist you with.
neuner
Posts: 1
Joined: Tue May 28, 2019 12:30 pm

IP3M-HX2B Connected but No Live View

Postby neuner » Tue May 28, 2019 12:38 pm

We have an IP3M-HX2B which use to work for a while but would disconnect itself and turn the front light to red. Now it won't display a live feed at all.

I hard reset the camera and was able to connect it using wifi/ethernet. In the last step of setup, when I select to 'go to live view', the light turns from green to red and says it failed to connect.

After being on for a while, it will turn green again and then back to red on its own. It will keep going through this cycle as long as it is left on, whether you connect it or not.

User avatar
Revo2Maxx
Posts: 183
Joined: Sat Jun 15, 2019 3:05 pm

Re: IP3M-HX2B Connected but No Live View

Postby Revo2Maxx » Fri Jul 26, 2019 1:27 am

Hello and welcome to the Forum. Have you figured out what your problem was? In that last step you might want to look at the type of view your going to stream It might be set to extra. I would check and if it is set it to main?

Have you tried to find the Camera using Amcrest Ip Config?
A Lie is a Lie, no matter how big or Small. The Truth will set you Free
Secure you & your Future be Safe

James


Return to “IP Cameras”

Who is online

Users browsing this forum: No registered users and 4 guests