DVR wont display on TV
-
lingkinghenry
- Posts: 1
- Joined: Thu May 31, 2018 7:22 am
DVR wont display on TV
Got the DVR, the packaging is great is products seem really high quality. Everything is connected and all cables plugged in and the thing is definitely on and humming. However, when I plug the HDMI into my TV I cant get the video up.
Last edited by lingkinghenry on Wed Jul 11, 2018 1:56 am, edited 4 times in total.
Re: DVR wont display on TV
A few troubleshooting from my previous experiences:
1) Check the HDMI cable - change it, if possible;
2) Change the HDMI port on the TV;
3) Use another TV, if available.
4) Can you use the analog (RCA) connection? (if one exists).
5) Can you use with a VGA monitor?
To access the setup, you shouldn't need to have all cameras connected. So you can move the device to another room just to test with another TV.
If nothing works, very likely you will need to open a RMA.
1) Check the HDMI cable - change it, if possible;
2) Change the HDMI port on the TV;
3) Use another TV, if available.
4) Can you use the analog (RCA) connection? (if one exists).
5) Can you use with a VGA monitor?
To access the setup, you shouldn't need to have all cameras connected. So you can move the device to another room just to test with another TV.
If nothing works, very likely you will need to open a RMA.