AD410 relay to chime problem

Have some questions or having issues with your IP Camera(s), Post them here for the mods and other users to assist you with.
Post Reply
ChileHA
Posts: 1
Joined: Fri Aug 12, 2022 7:51 am

AD410 relay to chime problem

Post by ChileHA »

Long story short, I can’t get the relay to work on button press. My Hardware is:

AD410
Relay coil 24ac
Power Supply 24 ac - 1 Amp
Chime Kit

The actual chime is 220vac but at this point does not matter because the relay does not function on button press. I check and the relay works when i directly apply the 24ac. The connections are right as you can see in the attached.

when I test the voltage I the relay coil when at rest is about 2 Volts, and when I press, I see no change.
What can be the problem? lac of power supply?
Attachments
WhatsApp Image 2022-08-12 at 10.01.00 AM (1).jpeg
WhatsApp Image 2022-08-12 at 10.01.00 AM (1).jpeg (72.83 KiB) Viewed 1175 times
Post Reply