IP2M-841B NAS Settings

[slickrock]

I want to save recordings, snaps and config files to my NAS. When I use the windows path: \\NAS\share\cam, I get an error. What path format should I be using?

[PeZzy]

Using the "NAS" method requires NFSv3 to be enabled on your NAS. You cannot use Windows paths as the camera is a Linux system. NFS must be first enabled on the NAS. Method will vary depending upon the NAS, but you would create a shared folder then allow NFS connections to it. If you are unable to enable NFS on the NAS, then you need to use the FTP method.

[slickrock]

Thank you.