Motion detection

Have some questions or having issues with Amcrest View Pro, Post them here for the mods and other users to assist you.
Post Reply
Edmiller67
Posts: 1
Joined: Sat Apr 25, 2020 3:50 pm

Motion detection

Post by Edmiller67 »

How can get my motion detection to record longer when triggered with the Amcrest View Pro app?
User avatar
Revo2Maxx
Site Admin
Posts: 3394
Joined: Sat Jun 15, 2019 3:05 pm

Re: Motion detection

Post by Revo2Maxx »

Hello and welcome to the forum

Sadly i personally don't know of a way from the App.. So this only leaves the WebUI and in there you can set how long a Recording Records however I am not sure that is the case for Motion or just full time Recordings... In the App you can only change things like Enable and disable Then in Advanced Config there is Anti Dither, Schedule, Sensitivity, and Region Settings then Able to turn on or off Push Notices. Turn on or off record delay and snapshots... Add Email but no way that I know of for setting Record time on events...
Try to Avoid CCA Networking Cables They are JUNK PERIOD!
Where there is Life there is Hope
James
jack7
Posts: 743
Joined: Tue May 29, 2018 7:46 pm

Re: Motion detection

Post by jack7 »

In View Pro, go to Configuation Center/Motion Detect/camera/Delay. Set Delay from 10s to 300s. Recording will continue after event alarm ends for the specified Delay.
Post Reply