Iphone Notifications

Have some questions or having issues with Amcrest View Pro, Post them here for the mods and other users to assist you.
Posts: 2
Joined: Wed Dec 07, 2016 1:03 pm

Iphone Notifications

Postby Jbnms99 » Fri Mar 22, 2019 9:09 am

23A23C19-9B42-43FE-B793-0B6423CAE841.png (504.55 KiB) Viewed 99 times
Hi, I have had amcrest cameras for years now and I have not been able to figure this out. I can view the cameras on my phone ( IPhone ) using the app without any issues. I can go back and view past events on the app without any issues. My issue is when I get a notification on my phone of motion or any kind of trigger it notifies me then goes to a screen that says no recording. It doesn't matter which of my 4 cameras triggers either it always goes to the same camera and says no recording. I hit the back button on the top left side of the screen and it goes to the 4 camera split screen and I can go back and see what triggered it if I wanted to. Is there a setting I have to change or is it just a faulty app? Thanks
Last edited by Jbnms99 on Fri Mar 22, 2019 10:47 am, edited 1 time in total.

Posts: 2
Joined: Wed Dec 07, 2016 1:03 pm

Re: Iphone Notifications

Postby Jbnms99 » Fri Mar 22, 2019 10:44 am

8157C7FF-D2D6-47C1-90B2-CD30DDC762B0.png (3.63 MiB) Viewed 101 times
35A52B16-49D5-4B8B-8696-8B8B33B152D5.png (757.98 KiB) Viewed 101 times
5CEC0488-9B76-4023-81C7-E55926F2D0D7.png (573.56 KiB) Viewed 101 times
It won’t let me put a video of it doing it so I took screen shots. Hope this helps!

Posts: 11
Joined: Thu Mar 14, 2019 10:24 pm

Re: Iphone Notifications

Postby duke69111 » Mon Jul 01, 2019 10:53 am

I experienced that as well when I first set mine up. I have four cameras setup through the Amcrest poe switch and four plugged directly into the NVR. I was getting video on the four from the NVR, but not the four through the switch. When you get a notification and it says no recording available, the notification is probably coming from a camera connected directly to the internet where no video is stored. Set your notifications to come from the nvr connected to the camera and then you will get video and the still shots when clicking the notification.

That's how I fixed mine. I hope this helps.

Posts: 58
Joined: Wed Jun 29, 2016 10:33 am

Re: Iphone Notifications

Postby tonester » Mon Jul 22, 2019 12:15 pm

No that is not the issue--like the OP, I too have gotten the "No recording" message when attempting to acknowledge iOS push notifications from the Amcrest app. Changing the Push Notification setting in the app from "Video" to "Live View" eliminates the "No recording" issue and does bring up video if you acknowledge the iOS notification alert--unfortunately though it opens the live view video feed rather than bringing up the recorded video of the event associated with the notification, so essentially this *fix* does nothing to resolve the issue.

User avatar
Posts: 52
Joined: Sat Jun 15, 2019 3:05 pm

Re: Iphone Notifications

Postby Revo2Maxx » Mon Jul 22, 2019 2:41 pm

I think what needs to happen for the send from Video area your camera has to be saving the data on the SD card. If not then it will come back as nothing to play. however if you have it saving to the SD card either video and you pick push for video or snap shot and your push is for snap shot and nothing comes back then you would want to make sure your SD card is ok. If you have it going to NVR/DVR or FTP or NAS then pick live view and when you can access the nas or ftp use the history in your app to locate the right times for checking the footage.
Secure you & your Future be Safe


Return to “Amcrest View Pro”

Who is online

Users browsing this forum: No registered users and 1 guest