Amcrest Users,
We welcome all our customers to our Software Beta testing. This beta is for new updated version of Amcrest Surveillance Pro 2.0. Below are details of how to participate, we will list any new features and known bugs with the new Test ASP. Let us know your feedback and if you discover any new bugs!
Caution
This Test Software is only for Windows.
Although fully tested to work with Amcrest models there may be some settings or configuration bugs that the development team still needs to work on
Software Beta
For Windows ONLY
https://www.dropbox.com/s/pvd3gdygfm93o ... 9.exe?dl=0
Please leave any feedback, suggestions, or bugs you run into on this forum post. With your help, we hope to be able to address all bugs faster and be able to release the new ASP software sooner.
Thank you,
Kwing L.
Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Add devices "auto search" doesn't work for me, after changing the IP range to that used by my LAN, search came back blank. Adding cameras manually works fine.
My AMCREST Cameras:-
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Auto search for devices does not work, manual add of cameras works.
Can't get any of my cameras to record using PC-NVR. PC-NVR is configured and logged on. Five cameras were added. They are all set to record all the time. After completing the setup I waited 10 minutes and started playback, selected all of the cameras setup to record but nothing was found.
Can't get any of my cameras to record using PC-NVR. PC-NVR is configured and logged on. Five cameras were added. They are all set to record all the time. After completing the setup I waited 10 minutes and started playback, selected all of the cameras setup to record but nothing was found.
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Auto Search worked for me, but I didn't change the Device Segment.
Amcrest P2P worked for me when adding a camera manually.
PC-NVR worked for me with three cameras recording continuously, and Playback worked.
Amcrest P2P worked for me when adding a camera manually.
PC-NVR worked for me with three cameras recording continuously, and Playback worked.
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
I just restarted NVR and ASP and the recording for all cameras started working. I didn't change anything, just restarted NVR and ASP.mclemens wrote: ↑Thu Feb 27, 2020 6:29 pm Auto search for devices does not work, manual add of cameras works.
Can't get any of my cameras to record using PC-NVR. PC-NVR is configured and logged on. Five cameras were added. They are all set to record all the time. After completing the setup I waited 10 minutes and started playback, selected all of the cameras setup to record but nothing was found.
While I was trying to change the play back speed for one of the cameras ASP stopped completely. I had live view and playback running at the time the app disappeared. I had just one camera doing playback and 6 cameras in live view.
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Trying to set motion detect areas in ASP doesn't work for me.
If I select one device, then I can make changes and save them. OK so far, but now if I select another device and go into the motion detect settings, the selected area is still displayed for the previous device. Change the settings for the second device and save, go back to the first device and now the settings for that have changed to what I just set for the second device.
If I set motion detection up in the WebGUI for each device and then check them out in ASP, the correct settings are shown for each device.
If I select one device, then I can make changes and save them. OK so far, but now if I select another device and go into the motion detect settings, the selected area is still displayed for the previous device. Change the settings for the second device and save, go back to the first device and now the settings for that have changed to what I just set for the second device.
If I set motion detection up in the WebGUI for each device and then check them out in ASP, the correct settings are shown for each device.
My AMCREST Cameras:-
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Playback, search does not work for me when "picture" is selected. It returns an error "Failed to download filename.jpg" so it is aware that snapshots exist.
Same thing happens no matter whether I select the actual device or the same device within PC-NVR.
Same thing happens no matter whether I select the actual device or the same device within PC-NVR.
My AMCREST Cameras:-
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Hope I'm not just overlooking it, but the ability to zoom in on the timeline in playback seems to be missing. I'm sure you used to be able to select several different zoom levels from 24hrs right down to 30 mins. Made controlling the play position much easier.
My AMCREST Cameras:-
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
Longedge,
I also see the problem with motion detect areas, and with Playback pictures. But from my experience with other SmartPSS versions, recording snapshots does not appear to be a feature of PC-NVR.
In ASP 2, use mouse wheel to zoom time line, and click hold to move zoomed time line.
I also see the problem with motion detect areas, and with Playback pictures. But from my experience with other SmartPSS versions, recording snapshots does not appear to be a feature of PC-NVR.
In ASP 2, use mouse wheel to zoom time line, and click hold to move zoomed time line.
Re: Amcrest Surveillance Pro 2.0 Beta (Windows Only)
That's it, another one solved Thanks Jack.
Edit - mouse wheel zoom works OK but then while I was experimenting with it ASP crashed/closed down. When I restarted it all my cameras showed offline and I had to go into "Devices" and force a manual login for each one including PC-NVR. First time it's ever crashed on me.
My AMCREST Cameras:-
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03
2 x IP3M-941B firmware V2.620.00AC00.3.R, Build Date: 2019-12-18
1 x IP2M-841B firmware V2.420.AC00.18.R, Build Date: 2019-08-03